From 95c0b77dd14e50299d503b5ab2ff10cf0b1c5298 Mon Sep 17 00:00:00 2001 From: philemon Date: Sun, 29 Oct 2017 18:28:19 +0300 Subject: [PATCH] modified: Getting-Started-with-MMGen.md modified: Home.md modified: Install-Bitcoind-from-Source-on-Debian-or-Ubuntu-Linux.md modified: Install-Bitcoind.md modified: MMGen-Quick-Start-with-Regtest-Mode.md modified: man-addrgen.md modified: man-addrimport.md modified: man-autosign.md modified: man-keygen.md modified: man-passchg.md modified: man-passgen.md modified: man-tool.md modified: man-txbump.md modified: man-txcreate.md modified: man-txdo.md modified: man-txsend.md modified: man-txsign.md modified: man-walletchk.md modified: man-walletconv.md modified: man-walletgen.md --- Getting-Started-with-MMGen.md | 18 ++-- Home.md | 2 +- ...d-from-Source-on-Debian-or-Ubuntu-Linux.md | 26 +++-- Install-Bitcoind.md | 100 +++++++++++------- MMGen-Quick-Start-with-Regtest-Mode.md | 7 ++ man-addrgen.md | 4 +- man-addrimport.md | 6 +- man-autosign.md | 71 +++++++------ man-keygen.md | 4 +- man-passchg.md | 2 +- man-passgen.md | 2 +- man-tool.md | 18 ++-- man-txbump.md | 2 +- man-txcreate.md | 4 +- man-txdo.md | 2 +- man-txsend.md | 4 +- man-txsign.md | 4 +- man-walletchk.md | 2 +- man-walletconv.md | 2 +- man-walletgen.md | 2 +- 20 files changed, 166 insertions(+), 116 deletions(-) diff --git a/Getting-Started-with-MMGen.md b/Getting-Started-with-MMGen.md index 4cf66ff..0ef856a 100644 --- a/Getting-Started-with-MMGen.md +++ b/Getting-Started-with-MMGen.md @@ -27,8 +27,7 @@ * With an online (hot) wallet * With an offline (cold storage) wallet -#### Altcoin support -* Bitcoin Cash (BCH) +#### Forkcoin and Altcoin support (BCH,LTC) ### Preliminaries @@ -849,16 +848,17 @@ them in turn until you get a confirmation: $ mmgen-txsend 124FFF[0.1,150].sigtx # ...if this doesn't confirm, then $ mmgen-txsend 73DABB[0.1,200].sigtx -### Altcoin support +### Forkcoin and Altcoin support (BCH,LTC) -#### Bitcoin Cash (BCH) +To use MMGen with Bitcoin Cash (BCH) or Litecoin (LTC), first make sure the +Bitcoin ABC or Litecoin daemon is properly installed +([source][si])([binaries][bi]) and [running][p8]. -To use MMGen with Bitcoin Cash (BCH), first make sure the Bitcoin ABC -daemon is properly installed ([source][si])([binaries][bi]), running and -listening for RPC connections on [port 8442][p8]. +MMGen requires that the bitcoin-abc daemon be listening on non-standard +[port 8442][p8]. -Then just add the `--coin=bch` option to all your MMGen commands. It's that -simple! +Then just add the `--coin=bch` or `--coin=ltc` option to all your MMGen +commands. It's that simple! [01]: https://github.com/mmgen/mmgen/wiki/Tracking-and-spending-ordinary-Bitcoin-addresses [02]: https://tpfaucet.appspot.com diff --git a/Home.md b/Home.md index 464f426..f90dbd7 100644 --- a/Home.md +++ b/Home.md @@ -15,4 +15,4 @@ > #### [Recovering your keys without the MMGen software](Recovering-Your-Keys-Without-the-MMGen-Software) -> #### [Bitcoin Cash (BCH) support](Getting-Started-with-MMGen#a_bch) +> #### [Forkcoin and Altcoin support (BCH,LTC)](Getting-Started-with-MMGen#a_alt) diff --git a/Install-Bitcoind-from-Source-on-Debian-or-Ubuntu-Linux.md b/Install-Bitcoind-from-Source-on-Debian-or-Ubuntu-Linux.md index f568b00..debbd9f 100644 --- a/Install-Bitcoind-from-Source-on-Debian-or-Ubuntu-Linux.md +++ b/Install-Bitcoind-from-Source-on-Debian-or-Ubuntu-Linux.md @@ -1,6 +1,6 @@ -***Note for Raspbian and Armbian users: Compiling the bitcoin daemon will -probably fail on a RPi or RPi clone due to insufficient memory. Fortunately, -ARM binaries are available for both Bitcoin Core and Bitcoin ABC. See the +***Note for Raspbian and Armbian users: Compiling the Bitcoin or Litecoin daemon +may fail on a RPi or RPi clone due to insufficient memory. Fortunately, ARM +binaries are available for Bitcoin Core, Bitcoin ABC and Litecoin. See the [binary installation page][01] for details.*** ### Install dependencies: @@ -60,15 +60,27 @@ ARM binaries are available for both Bitcoin Core and Bitcoin ABC. See the $ sudo install -sv bitcoind /usr/local/bin/bitcoind-abc > From now on, you'll invoke the daemon as 'bitcoind-abc' instead of 'bitcoind'. -> Or alternatively, to simplify the starting and stopping of two daemons on the -> same machine, download and use the node start and stop scripts from the -> MMGenLive project: + +### Compile and install Litecoin (optional): + +> Clone the Litecoin repository, compile and install: + + $ git clone https://github.com/litecoin-project/litecoin.git + $ cd litecoin + $ ./autogen.sh + $ ./configure --without-gui --with-incompatible-bdb + $ make -j4 + $ cd src + $ sudo install -sv litecoind litecoin-cli /usr/local/bin + +> To simplify the starting and stopping of several daemons on the same machine, +> download and use the node start and stop scripts from the MMGenLive project: $ curl -O 'https://raw.githubusercontent.com/mmgen/MMGenLive/master/home.mmgen/bin/mmlive-node-{start,stop}' $ sudo install -v mmlive-node-{start,stop} /usr/local/bin Refer to [Run][02] on the binary installation page for instructions on running -the bitcoin daemon(s). +your coin daemon(s). [01]: Install-Bitcoind [02]: Install-Bitcoind#a_r diff --git a/Install-Bitcoind.md b/Install-Bitcoind.md index 9fbf59f..5bceb70 100644 --- a/Install-Bitcoind.md +++ b/Install-Bitcoind.md @@ -1,4 +1,4 @@ -## Installing the Bitcoin daemon +## Install Bitcoind and other supported coin daemons The bitcoin daemon on the **offline computer** is used solely to sign transactions and runs without a blockchain. Thus even a low-powered computer @@ -7,15 +7,15 @@ machine. The bitcoin daemon on the **online computer** requires a complete and up-to-date blockchain for tracking addresses. Since its work is more CPU and -disk intensive, a more powerful computer is recommended here. You'll also -need plenty of free disk space for the rapidly growing blockchain (~150GB at -the time of writing). +disk intensive, a more powerful computer is required here. You'll also need +plenty of free disk space for the growing blockchain (~160GB at the time of +writing). Two blockchain operations are especially resource-intensive: **synchronizing the blockchain** and **importing existing addresses with balances**. If you synchronize often (once a week, for example) and take care to import your -addresses **before** spending into them, then it's possible to use a -low-powered computer as your online machine. +addresses **before** spending into them, then it's possible to get by with a +more low-powered computer as your online machine. ### Download: @@ -29,83 +29,103 @@ low-powered computer as your online machine. >> If you wish to transact BCH (Bcash), then download the appropriate [Bitcoin >> ABC binary][abc] for your system as well. Windows users should choose the ->> executable installer. - +>> executable installer. >> *Consider the Bitcoin ABC binaries untrusted software. The author of the >> MMGen project makes no guarantees regarding their safety or reliability.* +> **Litecoin (optional):** + +>> Go to the Litecoin Core [download page][lc]. Choose the 32-bit or 64-bit +>> versions appropriate for your online and offline computers. Windows users +>> should choose the executable installer. + ### Install (both online and offline computers): > **Bitcoin Core:** ->> **Windows users:** Run the Windows installer with the default settings. ->> **Linux users:** Unpack the archive and copy the bitcoind and bitcoin-cli +>> **Windows:** Run the Windows installer with the default settings. Add +>> 'C:\Program Files\Bitcoin\daemon' to your [path][05]. +>> **Linux:** Unpack the archive and copy the 'bitcoind' and 'bitcoin-cli' >> binaries to /usr/local/bin. > **Bitcoin ABC (optional):** ->> **Windows users:** Run the Windows installer, installing into the alternate ->> folder C:\Program Files\Bitcoin_ABC. **Linux users:** Unpack the archive and ->> rename bitcoind to bitcoind-abc. Copy it to /usr/local/bin. +>> **Windows:** Run the Windows installer, installing into the alternate +>> folder 'C:\Program Files\Bitcoin_ABC'. Add 'C:\Program Files\Bitcoin_ABC\daemon' +>> to your [path][05]. Rename the file 'bitcoind' in that folder to +>> 'bitcoind-abc'. +>> **Linux:** Unpack the archive, rename 'bitcoind' to 'bitcoind-abc' and +>> copy it to /usr/local/bin. + +> **Litecoin (optional):** + +>> **Windows:** Run the Windows installer with the default settings. Add +>> 'C:\Program Files\Litecoin\daemon' to your [path][05]. +>> **Linux:** Unpack the archive and copy the 'litecoind' and +>> 'litecoin-cli' binaries to /usr/local/bin. ### Run (both online and offline computers): > **Windows:** >> In the Windows command-line environment processes don't fork to run in the ->> background, so you'll have to run each daemon in a separate terminal window. ->> If you're running Core only, open an MSYS terminal and start the daemon with ->> the command: +>> background, so to run multiple daemons simultaneously you must start each +>> one in a separate terminal window. Start your daemons like this: + # Bitcoin Core: $ bitcoind ->> To run Bitcoin Core and Bitcoin ABC simultaneously, open two MSYS terminals. ->> In the first, run the command: + # ABC: + $ mkdir $APPDATA/Bitcoin_ABC + $ bitcoind-abc --listen=0 --rpcport=8442 --datadir=$APPDATA/Bitcoin_ABC - $ /c/Program\ Files/Bitcoin/daemon/bitcoind.exe + # Litecoin + $ litecoind ->> In the second, run: - - $ mkdir /c/Users/yourusername/AppData/Roaming/Bitcoin_ABC - $ /c/Program\ Files/Bitcoin_ABC/daemon/bitcoind.exe -rpcport=8442 -datadir=/c/Users/yourusername/AppData/Roaming/Bitcoin_ABC +>> Note that the `--listen=0` argument is required only when running Core and ABC simultaneously. > **Linux:** ->> Run the Core daemon: +>> Linux users start their daemons like this: - $ bitcoind -daemon - ->> Run the ABC daemon (if applicable): + # Bitcoin Core: + $ bitcoind --daemon + # ABC: $ mkdir ~/.bitcoin-abc - $ bitcoind-abc -daemon -rpcport=8442 -datadir=~/.bitcoin-abc + $ bitcoind-abc --daemon --listen=0 --rpcport=8442 --datadir=$HOME/.bitcoin-abc + + # Litecoin: + $ litecoind --daemon > Communicate with your daemons like this: ->> Core: - + # Core: $ bitcoin-cli help ->> ABC: + # ABC: + $ bitcoin-cli --rpcport=8442 help - $ bitcoin-cli -rpcport=8442 help + # Litecoin: + $ litecoin-cli help -> Warning: If you're using an existing Bitcoin Core or ABC installation, **move +> Warning: If you're using an existing Bitcoin or Litecoin installation, **move > your wallet.dat out of harm's way** before starting the daemon. The new > wallet now created will be used as your **tracking wallet**. > If you're connected to the Internet, bitcoind will begin downloading and > verifying the blockchain. This can take from several hours to several days -> depending on the speed of your computer and Internet connection. The initial -> block download can be sped up enormously by adding the `-assumevalid` option, -> followed by a recent block hash, to the command line. The block hash can be -> found on a blockchain explorer site. +> depending on the speed of your computer and Internet connection. You can +> speed up your initial block download enormously by adding the `-assumevalid` +> option, followed by a recent block hash, to the command line. Recent block +> hashes can be found on any blockchain explorer site. -> For the offline daemon you may add the options `-maxconnections=0 -listen=0` -> to the command line. Note that in the absence of a blockchain the offline -> daemon starts very quickly and uses practically no CPU once running. +> For the offline daemons you may add the options `-maxconnections=0 -listen=0` +> to the command line. Note that offline daemons start very quickly, since they +> have no blockchains, and use practically no CPU once running. [01]: https://bitcoin.org/en/download [bd]: https://bitcoin.org/bin/blockchain/ [05]: Editing-the-user-path-in-Windows [abc]: https://download.bitcoinabc.org/ +[lc]: https://download.litecoin.org/litecoin-0.15.0.1rc1/ diff --git a/MMGen-Quick-Start-with-Regtest-Mode.md b/MMGen-Quick-Start-with-Regtest-Mode.md index b2c7643..0b44d0d 100644 --- a/MMGen-Quick-Start-with-Regtest-Mode.md +++ b/MMGen-Quick-Start-with-Regtest-Mode.md @@ -34,6 +34,9 @@ This tutorial provides a quick, hands-on introduction. ... Type uppercase 'YES' to confirm: YES + Since your Bob has a different Seed ID, your address filename will of course + be different than this one. + 5. List the addresses in Bob's tracking wallet. You'll see the addresses you just imported: @@ -50,6 +53,8 @@ just imported: $ mmgen-regtest send mw42oJ94yRA6ZUNSzmMpjZDR74JNyvqzzZ 500 + Don't forget to substitute your C:1 address for the one above! + 7. Make sure the funds reached their destination: $ mmgen-tool --bob listaddresses showempty=1 @@ -93,6 +98,8 @@ Specify a fee of 20 satoshis/byte and make output quieter: Type uppercase 'YES' to confirm: YES Transaction sent: 78ca853816b55527b42ca8784c887a5f482c752522f914d2f17d6afcd8a3b076 + Don't forget to use your Alice's Seed ID here, instead of '9304C211'. + Note that for simplicity's sake this tutorial uses the `mmgen-txdo` command to create, sign and send transactions in one operation. In normal, cold wallet mode, your seed will be held on a separate offline computer which diff --git a/man-addrgen.md b/man-addrgen.md index d80d5f8..e31686f 100644 --- a/man-addrgen.md +++ b/man-addrgen.md @@ -38,7 +38,7 @@ ADDRESS TYPES: 'C','compressed' - Compressed P2PKH address - 'S','segwit' - Segwit P2SH-P2WPK address + 'S','segwit' - Segwit P2SH-P2WPKH address 'L','legacy' - Legacy uncompressed address @@ -66,4 +66,4 @@ SeedFile .mmseed mmseed,seed,s Wallet .mmdat wallet,w - MMGEN v0.9.4 October 2017 MMGEN-ADDRGEN(1) + MMGEN v0.9.5 November 2017 MMGEN-ADDRGEN(1) diff --git a/man-addrimport.md b/man-addrimport.md index 75697e4..e9c5f6c 100644 --- a/man-addrimport.md +++ b/man-addrimport.md @@ -4,9 +4,9 @@ OPTIONS: -h, --help Print this help message --longhelp Print help message for long options (common options) - -a, --address a Import the single Bitcoin address 'a' + -a, --address a Import the single coin address 'a' -b, --batch Import all addresses in one RPC call. - -l, --addrlist Address source is a flat list of (non-MMGen) Bitcoin addresses + -l, --addrlist Address source is a flat list of non-MMGen coin addresses -k, --keyaddr-file Address source is a key-address file -q, --quiet Suppress warnings -r, --rescan Rescan the blockchain. Required if address to import is @@ -17,4 +17,4 @@ The --batch and --rescan options cannot be used together. - MMGEN v0.9.4 October 2017 MMGEN-ADDRIMPORT(1) + MMGEN v0.9.5 November 2017 MMGEN-ADDRIMPORT(1) diff --git a/man-autosign.md b/man-autosign.md index 842c861..34618a3 100644 --- a/man-autosign.md +++ b/man-autosign.md @@ -1,53 +1,64 @@ MMGEN-AUTOSIGN: Auto-sign MMGen transactions USAGE: mmgen-autosign [opts] [command] OPTIONS: - -h, --help Print this help message - --longhelp Print help message for long options (common options) - -l, --led Use status LED to signal standby, busy and error - -s, --stealth-led Stealth LED mode - signal busy and error only, and only - after successful authorization. + -h, --help Print this help message + --longhelp Print help message for long options (common options) + -c, --coins c Coins to sign for (comma-separated list) + -l, --led Use status LED to signal standby, busy and error + -m, --mountpoint m Specify an alternate mountpoint (default: '/mnt/tx') + -s, --stealth-led Stealth LED mode - signal busy and error only, and only + after successful authorization. + -q, --quiet Produce quieter output + -v, --verbose Produce more verbose output COMMANDS - gen_secret - generate the shared secret and copy to /dev/shm and USB stick - wait - start in loop mode: wait - mount - sign - unmount - wait + gen_key - generate the wallet encryption key and copy it to '/mnt/tx/tx' + setup - generate the wallet encryption key and wallet + wait - start in loop mode: wait-mount-sign-unmount-wait USAGE NOTES - If invoked with no command, the program mounts the USB stick, signs any - unsigned transactions, unmounts the USB stick and exits. + If invoked with no command, the program mounts a removable device containing + MMGen transactions, signs any unsigned transactions, unmounts the removable + device and exits. - If invoked with 'wait', the program waits in a loop, mounting, signing - and unmounting every time the USB stick is inserted. The status LED - indicates whether the program is busy or in standby mode, i.e. ready for - USB stick insertion or removal. + If invoked with 'wait', the program waits in a loop, mounting, signing and + unmounting every time the removable device is inserted. - The USB stick must have a partition with the label MMGEN_TX and a user- + On supported platforms (currently Orange Pi and Raspberry Pi boards), the + status LED indicates whether the program is busy or in standby mode, i.e. + ready for device insertion or removal. + + The removable device must have a partition labeled MMGEN_TX and a user- writable directory '/tx', where unsigned MMGen transactions are placed. - On the signing machine the directory /mnt/tx must exist and /etc/fstab must - contain the following entry: + On the signing machine the mount point '/mnt/tx' must exist and /etc/fstab + must contain the following entry: LABEL='MMGEN_TX' /mnt/tx auto noauto,user 0 0 - The signing wallet or wallets must be in MMGen mnemonic format and - present in /dev/shm. The wallet(s) can be created interactively with - the following command: + Transactions are signed with a wallet on the signing machine (in the directory + '/dev/shm/autosign') encrypted with a 64-character hexadecimal password on the + removable device. - $ mmgen-walletconv -i words -o words -d /dev/shm + The password and wallet can be created in one operation by invoking the + command with 'setup' with the removable device inserted. The user will be + prompted for a seed mnemonic. - mmgen-autosign checks that a shared secret is present on the USB stick - before signing transactions. The shared secret is generated by invoking - the command with 'gen_secret' with the USB stick inserted. For good - security, it's advisable to re-generate a new shared secret before each - signing session. + Alternatively, the password and wallet can be created separately by first + invoking the command with 'gen_key' and then creating and encrypting the + wallet using the -P (--passwd-file) option: - Status LED functionality is supported on Orange Pi and Raspberry Pi boards. + $ mmgen-walletconv -r0 -q -iwords -d/dev/shm/autosign -p1 -P/mnt/tx/tx/autosign.key -Llabel - This program is a helper script and is not installed by default. You - may copy it to your executable path if you wish, or just run it in place - in the scripts directory of the MMGen repository root where it resides. + Note that the hash preset must be '1'. Multiple wallets are permissible. - MMGEN v0.9.4 October 2017 MMGEN-AUTOSIGN(1) + For good security, it's advisable to re-generate a new wallet and key for + each signing session. + + This command is currently available only on Linux-based platforms. + + MMGEN v0.9.5 November 2017 MMGEN-AUTOSIGN(1) diff --git a/man-keygen.md b/man-keygen.md index 8e2f1a9..7006f95 100644 --- a/man-keygen.md +++ b/man-keygen.md @@ -42,7 +42,7 @@ ADDRESS TYPES: 'C','compressed' - Compressed P2PKH address - 'S','segwit' - Segwit P2SH-P2WPK address + 'S','segwit' - Segwit P2SH-P2WPKH address 'L','legacy' - Legacy uncompressed address @@ -70,4 +70,4 @@ SeedFile .mmseed mmseed,seed,s Wallet .mmdat wallet,w - MMGEN v0.9.4 October 2017 MMGEN-KEYGEN(1) + MMGEN v0.9.5 November 2017 MMGEN-KEYGEN(1) diff --git a/man-passchg.md b/man-passchg.md index a326ddf..f93a495 100644 --- a/man-passchg.md +++ b/man-passchg.md @@ -43,4 +43,4 @@ SeedFile .mmseed mmseed,seed,s Wallet .mmdat wallet,w - MMGEN v0.9.4 October 2017 MMGEN-PASSCHG(1) + MMGEN v0.9.5 November 2017 MMGEN-PASSCHG(1) diff --git a/man-passgen.md b/man-passgen.md index a1322eb..ee9fb6d 100644 --- a/man-passgen.md +++ b/man-passgen.md @@ -78,4 +78,4 @@ SeedFile .mmseed mmseed,seed,s Wallet .mmdat wallet,w - MMGEN v0.9.4 October 2017 MMGEN-PASSGEN(1) + MMGEN v0.9.5 November 2017 MMGEN-PASSGEN(1) diff --git a/man-tool.md b/man-tool.md index 15a0310..e585382 100644 --- a/man-tool.md +++ b/man-tool.md @@ -1,4 +1,4 @@ - MMGEN-TOOL: Perform various MMGen- and Bitcoin-related operations + MMGEN-TOOL: Perform various MMGen- and cryptocoin-related operations USAGE: mmgen-tool [opts] OPTIONS: -d, --outdir d Specify an alternate directory 'd' for output @@ -12,23 +12,23 @@ COMMANDS - Bitcoin address/key operations (compressed public keys supported): - addr2hexaddr - convert Bitcoin address from base58 to hex format + Cryptocoin address/key operations (compressed public keys supported): + addr2hexaddr - convert coin address from base58 to hex format hex2wif - convert a private key from hex to WIF format - hexaddr2addr - convert Bitcoin address from hex to base58 format - privhex2addr - generate Bitcoin address from private key in hex format + hexaddr2addr - convert coin address from hex to base58 format + privhex2addr - generate coin address from private key in hex format privhex2pubhex - generate a hex public key from a hex private key pubhex2addr - convert a hex pubkey to an address pubhex2redeem_script - convert a hex pubkey to a witness redeem script wif2redeem_script - convert a WIF private key to a witness redeem script wif2segwit_pair - generate both a Segwit redeem script and address from WIF - pubkey2addr - convert Bitcoin public key to address + pubkey2addr - convert coin public key to address randpair - generate a random private key/address pair randwif - generate a random private key in WIF format - wif2addr - generate a Bitcoin address from a key in WIF format + wif2addr - generate a coin address from a key in WIF format wif2hex - convert a private key from WIF to hex format - Wallet/TX operations (bitcoind must be running): + Wallet/TX operations (coin daemon must be running): getbalance - like 'bitcoin-cli getbalance' but shows confirmed/unconfirmed, spendable/unspendable balances for individual MMGen wallets listaddress - list the specified MMGen address and its balance @@ -91,4 +91,4 @@ Type 'mmgen-tool help for help on a particular command - MMGEN v0.9.4 October 2017 MMGEN-TOOL(1) + MMGEN v0.9.5 November 2017 MMGEN-TOOL(1) diff --git a/man-txbump.md b/man-txbump.md index da86dac..3f0a9bb 100644 --- a/man-txbump.md +++ b/man-txbump.md @@ -77,4 +77,4 @@ SeedFile .mmseed mmseed,seed,s Wallet .mmdat wallet,w - MMGEN v0.9.4 October 2017 MMGEN-TXBUMP(1) + MMGEN v0.9.5 November 2017 MMGEN-TXBUMP(1) diff --git a/man-txcreate.md b/man-txcreate.md index 144142d..db70b45 100644 --- a/man-txcreate.md +++ b/man-txcreate.md @@ -1,4 +1,4 @@ - MMGEN-TXCREATE: Create a transaction with outputs to specified Bitcoin or MMGen addresses + MMGEN-TXCREATE: Create a transaction with outputs to specified coin or MMGen addresses USAGE: mmgen-txcreate [opts] ... [change addr] [addr file] ... OPTIONS: -h, --help Print this help message @@ -44,4 +44,4 @@ a plain decimal number, or as satoshis per byte, using an integer followed by the letter 's'. - MMGEN v0.9.4 October 2017 MMGEN-TXCREATE(1) + MMGEN v0.9.5 November 2017 MMGEN-TXCREATE(1) diff --git a/man-txdo.md b/man-txdo.md index c9b0101..97a17d9 100644 --- a/man-txdo.md +++ b/man-txdo.md @@ -101,4 +101,4 @@ SeedFile .mmseed mmseed,seed,s Wallet .mmdat wallet,w - MMGEN v0.9.4 October 2017 MMGEN-TXDO(1) + MMGEN v0.9.5 November 2017 MMGEN-TXDO(1) diff --git a/man-txsend.md b/man-txsend.md index dcaabb8..23ddf4e 100644 --- a/man-txsend.md +++ b/man-txsend.md @@ -1,4 +1,4 @@ - MMGEN-TXSEND: Send a Bitcoin transaction signed by mmgen-txsign + MMGEN-TXSEND: Send a cryptocoin transaction signed by mmgen-txsign USAGE: mmgen-txsend [opts] OPTIONS: -h, --help Print this help message @@ -8,4 +8,4 @@ -s, --status Get status of a sent transaction -y, --yes Answer 'yes' to prompts, suppress non-essential output - MMGEN v0.9.4 October 2017 MMGEN-TXSEND(1) + MMGEN v0.9.5 November 2017 MMGEN-TXSEND(1) diff --git a/man-txsign.md b/man-txsign.md index 9149de7..9e03d7a 100644 --- a/man-txsign.md +++ b/man-txsign.md @@ -1,4 +1,4 @@ - MMGEN-TXSIGN: Sign Bitcoin transactions generated by mmgen-txcreate + MMGEN-TXSIGN: Sign cryptocoin transactions generated by mmgen-txcreate USAGE: mmgen-txsign [opts] ... [seed source]... OPTIONS: -h, --help Print this help message @@ -67,4 +67,4 @@ SeedFile .mmseed mmseed,seed,s Wallet .mmdat wallet,w - MMGEN v0.9.4 October 2017 MMGEN-TXSIGN(1) + MMGEN v0.9.5 November 2017 MMGEN-TXSIGN(1) diff --git a/man-walletchk.md b/man-walletchk.md index 4e480dc..8aa85a3 100644 --- a/man-walletchk.md +++ b/man-walletchk.md @@ -42,4 +42,4 @@ SeedFile .mmseed mmseed,seed,s Wallet .mmdat wallet,w - MMGEN v0.9.4 October 2017 MMGEN-WALLETCHK(1) + MMGEN v0.9.5 November 2017 MMGEN-WALLETCHK(1) diff --git a/man-walletconv.md b/man-walletconv.md index 0def3e4..eb32d09 100644 --- a/man-walletconv.md +++ b/man-walletconv.md @@ -52,4 +52,4 @@ SeedFile .mmseed mmseed,seed,s Wallet .mmdat wallet,w - MMGEN v0.9.4 October 2017 MMGEN-WALLETCONV(1) + MMGEN v0.9.5 November 2017 MMGEN-WALLETCONV(1) diff --git a/man-walletgen.md b/man-walletgen.md index 6a3e846..c6285ba 100644 --- a/man-walletgen.md +++ b/man-walletgen.md @@ -45,4 +45,4 @@ SeedFile .mmseed mmseed,seed,s Wallet .mmdat wallet,w - MMGEN v0.9.4 October 2017 MMGEN-WALLETGEN(1) + MMGEN v0.9.5 November 2017 MMGEN-WALLETGEN(1)