### [BTC](#a_btc) | [ETH](#a_eth) | [XMR](#a_xmr)
### mmgen-txcreate --coin=btc --help
```text
MMGEN-TXCREATE: Create a transaction with outputs to specified coin or MMGen addresses
USAGE: mmgen-txcreate [opts] [ADDR,AMT ... | DATA_SPEC] ADDR [addr file ...]
OPTIONS:
-h, --help Print this help message
--longhelp Print help message for long (global) options
-a, --autosign Create a transaction for offline autosigning (see
‘mmgen-autosign’). The removable device is mounted and
unmounted automatically
-A, --fee-adjust f Adjust transaction fee by factor ‘f’ (see below)
-B, --no-blank Don't blank screen before displaying unspent outputs
-c, --comment-file f Source the transaction's comment from file 'f'
-C, --fee-estimate-confs c Desired number of confirmations for fee estimation
(default: 3)
-d, --outdir d Specify an alternate directory 'd' for output
-E, --fee-estimate-mode M Specify the network fee estimate mode. Choices:
'conservative','economical'. Default: 'conservative'
-f, --fee f Transaction fee, as a decimal BTC amount or as
satoshis per byte (an integer followed by ‘s’).
See FEE SPECIFICATION below. If omitted, fee will be
calculated using network fee estimation.
-i, --info Display unspent outputs and exit
-I, --inputs i Specify transaction inputs (comma-separated list of
MMGen IDs or coin addresses). Note that ALL unspent
outputs associated with each address will be included.
-l, --locktime t Lock time (block height or unix seconds) (default: 0)
-L, --autochg-ignore-labels Ignore labels when autoselecting change addresses
-m, --minconf n Minimum number of confirmations required to spend
outputs (default: 1)
-q, --quiet Suppress warnings; overwrite files without prompting
-R, --no-rbf Make transaction non-replaceable (non-replace-by-fee
according to BIP 125)
-v, --verbose Produce more verbose output
-V, --vsize-adj f Adjust transaction's estimated vsize by factor 'f'
-y, --yes Answer 'yes' to prompts, suppress non-essential output
The transaction’s outputs are listed on the command line, while its inputs
are chosen from a list of the wallet’s unspent outputs via an interactive
menu. Alternatively, inputs may be specified using the --inputs option.
Addresses on the command line can be either native coin addresses or MMGen
IDs in the form SEED_ID:ADDRTYPE_CODE:INDEX.
Outputs are specified in the form ADDRESS,AMOUNT or ADDRESS. The first form
creates an output sending the given amount to the given address. The bare
address form designates the given address as either the change output or the
sole output of the transaction (excluding any data output). Exactly one bare
address argument is required.
For convenience, the bare address argument may be given as ADDRTYPE_CODE or
SEED_ID:ADDRTYPE_CODE (see ADDRESS TYPES below). In the first form, the first
unused address of type ADDRTYPE_CODE for each Seed ID in the tracking wallet
will be displayed in a menu, with the user prompted to select one. In the
second form, the user specifies the Seed ID as well, allowing the script to
select the transaction’s change output or single output without prompting.
See EXAMPLES below.
A single DATA_SPEC argument may also be given on the command line to create
an OP_RETURN data output with a zero spend amount. This is the preferred way
to embed data in the blockchain. DATA_SPEC may be of the form "data":DATA
or "hexdata":DATA. In the first form, DATA is a string in your system’s native
encoding, typically UTF-8. In the second, DATA is a hexadecimal string (with
the leading ‘0x’ omitted) encoding the binary data to be embedded. In both
cases, the resulting byte string must not exceed 4096 bytes in length.
If the transaction fee is not specified on the command line (see FEE
SPECIFICATION below), it will be calculated dynamically using network fee
estimation for the default (or user-specified) number of confirmations.
If network fee estimation fails, the user will be prompted for a fee.
Network-estimated fees will be multiplied by the value of --fee-adjust, if
specified.
ADDRESS TYPES:
Code Type Description
---- ---- -----------
‘L’ legacy - Legacy uncompressed address
‘C’ compressed - Compressed P2PKH address
‘S’ segwit - Segwit P2SH-P2WPKH address
‘B’ bech32 - Native Segwit (Bech32) address
‘X’ bech32x - Cross-chain Bech32 address
‘E’ ethereum - Ethereum address
‘Z’ zcash_z - Zcash z-address
‘M’ monero - Monero address
FEE SPECIFICATION
Transaction fees, both on the command line and at the interactive prompt, may
be specified as either absolute coin amounts, using a plain decimal number, or
as satoshis per byte, using an integer followed by ‘s’, for satoshi.
EXAMPLES:
Send 0.123 BTC to an external Bitcoin address, returning the change to a
specific MMGen address in the tracking wallet:
$ mmgen-txcreate bc1qj87nveegsvwmz8yj759xgua2vx2tzsywlny44t,0.123 01ABCDEF:B:7
Same as above, but select the change address automatically:
$ mmgen-txcreate bc1qj87nveegsvwmz8yj759xgua2vx2tzsywlny44t,0.123 01ABCDEF:B
Same as above, but select the change address automatically by address type:
$ mmgen-txcreate bc1qj87nveegsvwmz8yj759xgua2vx2tzsywlny44t,0.123 B
Same as above, but reduce verbosity and specify fee of 20 satoshis
per byte:
$ mmgen-txcreate -q -f 20s bc1qj87nveegsvwmz8yj759xgua2vx2tzsywlny44t,0.123 B
Send entire balance of selected inputs minus fee to an external Bitcoin
address:
$ mmgen-txcreate bc1qj87nveegsvwmz8yj759xgua2vx2tzsywlny44t
Send entire balance of selected inputs minus fee to first unused wallet
address of specified type:
$ mmgen-txcreate B
MMGEN-WALLET 16.1.dev37 May 2026 MMGEN-TXCREATE(1)
```
### mmgen-txcreate --coin=eth --help
```text
MMGEN-TXCREATE: Create a transaction with outputs to specified coin or MMGen addresses
USAGE: mmgen-txcreate --coin=eth [opts] ADDR,AMT [addr file ...]
OPTIONS:
-h, --help Print this help message
--longhelp Print help message for long (global) options
-a, --autosign Create a transaction for offline autosigning (see
‘mmgen-autosign’). The removable device is mounted and
unmounted automatically
-A, --fee-adjust f Adjust transaction fee by factor ‘f’ (see below)
-B, --no-blank Don't blank screen before displaying account info
-c, --comment-file f Source the transaction's comment from file 'f'
-d, --outdir d Specify an alternate directory 'd' for output
-D, --contract-data D Path to file containing hex-encoded contract data
-f, --fee f Transaction fee, as a decimal ETH amount or as
gas price (an integer followed by ‘w’,‘K’,‘M’,‘G’,‘s’ or ‘f’).
See FEE SPECIFICATION below. If omitted, fee will be
calculated using network fee estimation.
-g, --gas N Set the gas limit (see GAS LIMIT below)
-i, --info Display account info and exit
-I, --inputs i Specify transaction inputs (comma-separated list of
MMGen IDs or coin addresses). Note that ALL unspent
outputs associated with each address will be included.
-m, --minconf n Minimum number of confirmations required to spend
outputs (default: 1)
-q, --quiet Suppress warnings; overwrite files without prompting
-v, --verbose Produce more verbose output
-y, --yes Answer 'yes' to prompts, suppress non-essential output
-X, --cached-balances Use cached balances
The transaction’s outputs are listed on the command line, while its inputs
are chosen from a list of the wallet’s unspent outputs via an interactive
menu. Alternatively, inputs may be specified using the --inputs option.
Addresses on the command line can be either native coin addresses or MMGen
IDs in the form SEED_ID:ADDRTYPE_CODE:INDEX.
The transaction output is specified in the form ADDRESS,AMOUNT.
If the transaction fee is not specified on the command line (see FEE
SPECIFICATION below), it will be calculated dynamically using network fee
estimation for the default (or user-specified) number of confirmations.
If network fee estimation fails, the user will be prompted for a fee.
Network-estimated fees will be multiplied by the value of --fee-adjust, if
specified.
GAS LIMIT
This option specifies the maximum gas allowance for an Ethereum transaction.
It’s generally of interest only for token transactions or swap transactions
from token assets.
Parameter must be an integer or one of the special values ‘fallback’ (for a
locally computed sane default) or ‘auto’ (for gas estimate via an RPC call,
in the case of a token transaction, or locally computed default, in the case
of a standard transaction). The default is ‘auto’.
FEE SPECIFICATION
Transaction fees, both on the command line and at the interactive prompt, may
be specified as either absolute coin amounts, using a plain decimal number, or
as gas price, using an integer followed by ‘w’,‘K’,‘M’,‘G’,‘s’ or ‘f’, for
wei, Kwei, Mwei, Gwei, szabo and finney, respectively.
EXAMPLES:
Send 0.123 ETH to an external Ethereum address:
$ mmgen-txcreate --coin=eth 22610767a64ed579ed9382e8df2d92c68d3ab0e6,0.123
Send 0.123 ETH to another account in wallet 01ABCDEF:
$ mmgen-txcreate --coin=eth 01ABCDEF:E:7,0.123
MMGEN-WALLET 16.1.dev37 May 2026 MMGEN-TXCREATE(1)
```
### mmgen-txcreate --coin=xmr --help
```text
MMGEN-TXCREATE: Create a transaction with outputs to specified coin or MMGen addresses
USAGE: mmgen-txcreate --coin=xmr [opts] [ADDR,AMT]
OPTIONS:
-h, --help Print this help message
--longhelp Print help message for long (global) options
-a, --autosign Create a transaction for offline autosigning (see
‘mmgen-autosign’). The removable device is mounted and
unmounted automatically
-B, --no-blank Don't blank screen before displaying account info
-c, --comment-file f Source the transaction's comment from file 'f'
-d, --outdir d Specify an alternate directory 'd' for output
-i, --info Display account info and exit
-m, --minconf n Minimum number of confirmations required to spend
outputs (default: 1)
-p, --priority N Specify an integer priority ‘N’ for inclusion of trans-
action in blockchain (higher number means higher fee).
Valid parameters: 1=low 2=normal 3=high 4=highest.
If option is omitted, the default priority will be used
-q, --quiet Suppress warnings; overwrite files without prompting
-v, --verbose Produce more verbose output
-y, --yes Answer 'yes' to prompts, suppress non-essential output
The transaction’s output is listed on the command line, while its input
is chosen via an interactive menu.
The transaction output is specified in the form ADDRESS,AMOUNT.
EXAMPLES:
Send 0.123 XMR to an external Monero address:
$ mmgen-txcreate --coin=xmr 42ZNVTWwDcyXkKDQgvatxJZvTYvHCJGLh5NQCbrCrFSHVYaCANXYznaaKgL4qZEPKMP6WRxaB5TGAXCQnNTVzKSp4w4BQcx,0.123
Create a sweep transaction:
$ mmgen-txcreate --coin=xmr
MMGEN-WALLET 16.1.dev37 May 2026 MMGEN-TXCREATE(1)
```