## Table of Contents
#### [Preliminaries](#a_i)
* [Before you begin](#a_bb)
* [Invocation](#a_iv)
* [Configuration file](#a_cf)
* [Bob and Alice regtest mode](#a_ts)
#### [Generating an MMGen Wallet](#a_gw)
#### [Transacting](#a_tr)
* [Generate addresses](#a_ga)
* [Import addresses](#a_ia)
* [Create a transaction](#a_ct)
* [Sign a transaction](#a_sg)
* [Send a transaction](#a_st)
#### [Additional Features](#a_af)
* [Using the mnemonic, seed and hexseed formats](#a_ms)
* [Mnemonics, seeds and hexseeds: additional information](#a_ai)
* [Die roll wallet generation](#a_dr)
* [BIP39 mnemonic support](#a_39)
* [Monero mnemonic support](#a_mm)
* [Incognito wallets](#a_ic)
* [Hidden incognito wallets](#a_hi)
#### [Advanced Topics](#a_at)
* [Hot wallets](#a_hw)
* [Transaction Fees](#a_fee)
* [BIP 125 replace-by-fee (RBF) transactions](#a_rbf)
* [With an online (hot) wallet](#a_rbf_onl)
* [With an offline (cold storage) wallet](#a_rbf_onf)
* [Keeping your installation up to date](#a_utd)
### Preliminaries
#### Before you begin
Before you begin, note that the filenames, seed IDs and Bitcoin addresses used
in this primer are intentionally invalid and are for purposes of illustration
only. As you perform the exercises, you will substitute real ones in their
place.
The up arrow (for repeating commands) and tab key (or Ctrl-I) (for completing
commands and filenames) will speed up your work at the command line greatly.
The examples in this tutorial are geared towards Bitcoin, but with some
modification they may be used with altcoins and forkcoins for which MMGen
supports transaction operations (BCH, LTC, ETH and ETC as of this writing).
See [Altcoin-and-Forkcoin-Support][09] for more details.
#### Invocation
The MMGen wallet system is not a single program but a suite of lightweight
scripts run from the command line. MMGen’s commands all begin, not
surprisingly, with `mmgen`. To view all available commands, type `mmgen`
followed by the TAB key. Every mmgen command has a help screen displaying
detailed usage and options information. To view it, type the command name
followed by `--help`. Note that most command options have long and short
versions. For example, the `--help` option may be abbreviated to `-h`.
Exceptions are the options listed by `--longhelp`, which have no short versions.
MMGen commands are generally interactive, providing you with information and
prompting you for input. The `--verbose` or `-v` option requests commands to be
more wordy, while the `--quiet` or `-q` option suppresses all but the most
essential information. These options are available for all MMGen commands. The
`--yes` option (available only for certain commands) suppresses even more
information and can be used to make some commands non-interactive and scriptable.
Certain options require parameters, such as the `--seed-len` option, for
instance, which takes a parameter of `128`, `192` or `256`. Commands may also
take optional or required arguments. For example, `mmgen-addrgen` requires an
address or range of addresses as an argument. Arguments must always follow
options on the command line.
Sample MMGen command invocations:
```text
$ mmgen-txcreate --help
$ mmgen-addrgen --verbose 1-10
$ mmgen-walletgen
$ mmgen-walletgen --quiet --seed-len 128
```
#### Configuration file
Just like Bitcoin Core, MMGen has its own data directory and configuration file.
The data directory is `.mmgen` in the user’s home directory and the config
file is `mmgen.cfg`. The config file contains global settings which you may
wish to edit at some point to customize your installation. These settings
include the maximum transaction fee; the user name, password and hostname
used for communicating with your Bitcoin or altcoin daemon; and a number of
others.
#### Bob and Alice regtest mode
If you just want to quickly try out MMGen, it’s possible to perform all wallet
generation, wallet format conversion, address and key generation, and address
import operations on an offline computer with no blockchain and no bitcoin
balance.
If you want to practice creating, signing and sending transactions with real
bitcoins, however, you’ll need a fully synced blockchain and some coins to play
with. This involves an expenditure of both time and money.
Fortunately, there’s an alternative: MMGen’s **regtest mode** creates a virtual
network of two users, Bob and Alice, who transact with each other on a private
blockchain. All of MMGen’s functionality is available in regtest mode, making
it an ideal way to learn to use the MMGen wallet without risking real coins.
You may wish to pause here and perform the steps in the tutorial [MMGen Quick
Start with Regtest Mode][04] before continuing on.
### Generating an MMGen Wallet
*NOTE: MMGen supports a “default wallet” feature. After generating your wallet,
you’ll be prompted to make it your default. If you answer ‘y’, the wallet will
be stored in your MMGen data directory and used for all future commands that
require a wallet or other seed source.*
*You may not want this feature if you plan to store your MMGen wallet in a
location other than your MMGen data directory. Otherwise, it’s recommended,
as it frees you from having to type your wallet filename on the command line.*
*The following examples assume that you’ve chosen to use a default wallet.
If you haven’t, then you must include the path to a wallet file or other seed
source in all commands where a seed source is required.*
On your **offline** computer, generate an MMGen wallet:
```text
$ mmgen-walletgen
...
MMGen wallet written to file '/home/username/.mmgen/89ABCDEF-76543210[256,3].mmdat'
```
`89ABCDEF` is the Seed ID; `76543210` is the Key ID. These are randomly
generated, so your IDs will of course be different than these.
The Seed ID never changes and is used to identify all keys/addresses generated
by this wallet. Since it’s your wallet’s primary identifier, you should
memorize it visually. The Key ID changes whenever the wallet’s password or hash
preset are changed and doesn’t need to be memorized.
`256` is the seed length; `3` is the scrypt hash preset. These values are
configurable: type `mmgen-walletgen --help` for details.
Before moving any funds into your MMGen wallet, you should back it up in several
places and preferably on several media such as paper, flash memory or optical
disk. You’re advised to use a passphrase with your wallet. Otherwise, anyone
who gains physical access to one of your backups can easily steal your coins.
Don’t forget your passphrase. If you do, the coins in your MMGen wallet are
gone forever.
Since the wallet is a small, humanly readable ASCII file, it can easily be
printed out on paper.
Another highly recommended way to back up your wallet is to generate a mnemonic
seed phrase or seed file [as described below](#a_ms) and write it down or
memorize it. If you have an average or better memory, you’ll find memorizing
your seed phrase to be surprisingly easy. And the peace of mind that comes with
knowing that your coins are recoverable **even if you lose all your physical
backups** can’t be overestimated.
### Transacting
*The following transacting information is applicable to BTC, BCH, LTC, ETH and
ETC. For transacting with Monero, consult [Altcoin-and-Forkcoin-Support][ax]
and the [`mmgen-xmrwallet`][mx] help screen.*
#### Generate addresses (offline computer)
Now generate ten Segwit-P2SH addresses with your just-created wallet:
```text
$ mmgen-addrgen --type=segwit 1-10
...
Addresses written to file '89ABCDEF-S[1-10].addrs'
$ cat '89ABCDEF-S[1-10].addrs'
89ABCDEF SEGWIT {
1 36bNmyYISiptuvJG3X7MPwiiS4HYvD7ksE
2 3AmkUxrfy5dMrfmeYwTxLxfIswUCcpeysc
3 3HgYCsfqYzIg7LVVfDTp7gYJocJEiDAy6N
4 34Tu3z1tiexXDonNsFIkvzqutE5E3pTK8s
5 3PeI55vtp2bX2uKDkAAR2c6ekHNYe4Hcq7
6 3FEqfEsSILwXPfMvVvVuUovzTaaST62Mnf
7 3LTTzuhMqPLwQ4IGCwwugny6ZMtUQJSJ1
8 3F9495H8EJLb54wirgZkVgI47SP7M2RQWv
9 3JbrCyt7BdxRE9GX1N7GiEct8UnIjPmpYd
10 3H7vVTk4ejUbQXw45I6g5qvPBSe9bsjDqh
}
```
Note that the address range `1-10` specified on the command line is included in
the resulting filename.
MMGen currently supports four address types for Bitcoin and Bitcoin code fork
coins: `legacy` (uncompressed P2PKH), `compressed` (compressed P2PKH),
`segwit` (P2SH-P2WPKH) and `bech32` (native Segwit), denoted by the code
letters `L`, `C`, `S` and `B` respectively. Address types can be referred to
either in full or by code letter. To generate Bech32 addresses, for example,
you can specify either `--type=bech32` or `--type=B` on the command line.
For backwards compatibility, legacy addresses with uncompressed public keys
are generated by default, but this is almost certainly not what you want
unless you’re restoring an old MMGen installation created before compressed
address support was added. Most new users will wish to generate either
Segwit-P2SH (`S`) or Bech32 (`B`) addresses instead. For BCH, which lacks
Segwit support, compressed (`C`) addresses are the best choice.
Generation examples for various address types:
```text
# legacy (uncompressed P2PKH)
$ mmgen-addrgen 1-10
...
$ cat '89ABCDEF[1-10].addrs'
89ABCDEF {
1 12GiSWo9zIQgkCmjAaLIrbPwXhKry2jHhj
...
```
```text
# compressed P2PKH
$ mmgen-addrgen --type=compressed 1-10
...
$ cat '89ABCDEF-C[1-10].addrs'
89ABCDEF COMPRESSED {
1 13jbRxWjswXtaDzLBJDboMcIe6nLohFb9M
...
```
```text
# Bech32 (native Segwit)
$ mmgen-addrgen --type=bech32 1-10
...
$ cat '89ABCDEF-B[1-10].addrs'
89ABCDEF BECH32 {
1 bc1q9c9273thh3xh86lk6z34raejz6j2s8ytgyb7my
...
```
Note that for non-legacy address types the code letter is included in the
filename.
To fund your MMGen wallet, first import the addresses into your tracking wallet
and then send some coins to any of them. If you run out of addresses, generate
more. To generate a hundred addresses you’d specify an address range of
`1-100`.
Let’s say you’ve decided to spend some BTC into the first four addresses above.
Begin by importing these addresses into the tracking wallet on your online
machine so their balances will be visible. For convenience of reference,
provide the addresses with labels. We’ll use the labels ‘Donations’, ‘Storage
1’, ‘Storage 2’ and ‘Storage 3’.
Make a copy of the address file
```text
$ cp '89ABCDEF-S[1-10].addrs' my.addrs
```
and edit it using the text editor of your choice,
```text
$ nano my.addrs
```
adding labels to the addresses you’ve chosen to spend to:
```text
# My first MMGen addresses
89ABCDEF SEGWIT {
1 36bNmyYISiptuvJG3X7MPwiiS4HYvD7ksE Donations
2 3AmkUxrfy5dMrfmeYwTxLxfIswUCcpeysc Storage 1
3 3HgYCsfqYzIg7LVVfDTp7gYJocJEiDAy6N Storage 2
4 34Tu3z1tiexXDonNsFIkvzqutE5E3pTK8s Storage 3
5 3PeI55vtp2bX2uKDkAAR2c6ekHNYe4Hcq7
6 3FEqfEsSILwXPfMvVvVuUovzTaaST62Mnf
7 3LTTzuhMqPLwQ4IGCwwugny6ZMtUQJSJ1
8 3F9495H8EJLb54wirgZkVgI47SP7M2RQWv
9 3JbrCyt7BdxRE9GX1N7GiEct8UnIjPmpYd
10 3H7vVTk4ejUbQXw45I6g5qvPBSe9bsjDqh
}
```
Any line beginning with `#` is a comment. Comments may be placed at the ends
of lines as well.
Save the file, copy it onto a USB stick and transfer it to your online computer.
#### Import addresses (online computer)
On your online computer, go to your coin daemon’s data directory (`~/.bitcoin`
by default for Bitcoin Core) and move any existing `wallet.dat` file out of
harm’s way. With more recent coin daemons, `wallet.dat` can be found in the
`wallets` subdirectory of the daemon data directory.
Start the coin daemon with the required options (see the [Install-Bitcoind][08]
wiki page for more details on invoking the daemon for your coin and platform).
Upon startup, older daemons will automatically generate a new default
`wallet.dat`, which MMGen will use as its tracking wallet. With newer daemons
(e.g. Core 0.21.0 and above), the tracking wallet will be a directory named
`mmgen-tracking-wallet` located by default under the `wallets` subdirectory.
Import your ten addresses into the new tracking wallet with the command:
```text
$ mmgen-addrimport --batch my.addrs
```
These addresses will now be tracked: any BTC transferred to them will show up in
your listing of address balances. Balances can be viewed using `mmgen-tool
listaddresses` (the `showempty` option requests addresses with empty balances
to be displayed too).
```text
$ mmgen-tool listaddresses showempty=1
MMGenID ADDRESS COMMENT BALANCE
89ABCDEF:S:1 36bNmyYISiptuvJG3X7MPwiiS4HYvD7ksE Donations 0
89ABCDEF:S:2 3AmkUxrfy5dMrfmeYwTxLxfIswUCcpeysc Storage 1 0
89ABCDEF:S:3 3HgYCsfqYzIg7LVVfDTp7gYJocJEiDAy6N Storage 2 0
89ABCDEF:S:4 34Tu3z1tiexXDonNsFIkvzqutE5E3pTK8s Storage 3 0
89ABCDEF:S:5 3PeI55vtp2bX2uKDkAAR2c6ekHNYe4Hcq7 0
...
TOTAL: 0 BTC
```
*While not covered in this introduction, note that it’s also possible to [import
external coin addresses into your tracking wallet][01]. This allows you to
track and spend funds from another wallet with MMGen without having to go
through the network. To do this, you must save the keys corresponding to the
given addresses in a separate file for use during transaction signing.*
Note that each address has a unique ID (the ‘MMGen ID’) consisting of a Seed ID,
address type code letter, and index. Addresses of different types may be
imported into the same tracking wallet, and since they’re generated from different
sub-seeds you needn’t worry about key reuse. For example, the addresses
`89ABCDEF:S:1` and `89ABCDEF:B:1` are cryptographically unrelated: no one but the
wallet’s owner can see that they were generated from the same seed.
Now that your addresses are being tracked, you may go ahead and send some BTC to
them over the Bitcoin network. If you send 0.1, 0.2, 0.3 and 0.4 BTC
respectively, your address listing will look like this after the transactions
have confirmed:
```text
$ mmgen-tool listaddresses
MMGenID COMMENT BALANCE
89ABCDEF:S:1 Donations 0.1
89ABCDEF:S:2 Storage 1 0.2
89ABCDEF:S:3 Storage 2 0.3
89ABCDEF:S:4 Storage 3 0.4
TOTAL: 1 BTC
```
#### Create a transaction (online computer)
Now that you have some BTC under MMGen’s control, you’re ready to create a
transaction. Note that transactions are harmless until they’re signed and
broadcast to the network, so feel free to experiment and create transactions
with different combinations of inputs and outputs. Of course, if you’re using
testnet or regtest mode, then you risk nothing even when broadcasting
transactions.
To send 0.1 BTC to the a third-party address
`3AmkUxrfy5dMrfmeYwTxLxfIswUCcpeysc`, for example, and send the change back to
yourself at address `89ABCDEF:S:5`, you’d issue the following command:
```text
$ mmgen-txcreate 3AmkUxrfy5dMrfmeYwTxLxfIswUCcpeysc,0.1 89ABCDEF:S:5
```
`mmgen-txcreate` accepts either MMGen IDs or Bitcoin addresses as arguments.
NOTE: For backwards compatibility, legacy addresses may omit the code letter
from the MMGen ID. Thus address `89ABCDEF:L:5` may be expressed as
`89ABCDEF:5`. For other address types the code letter is mandatory.
To send 0.1 BTC to each of addresses `89ABCDEF:S:6` and `89ABCDEF:S:7`,
sending the change to `89ABCDEF:S:8`, you’d do this:
```text
$ mmgen-txcreate 89ABCDEF:S:6,0.1 89ABCDEF:S:7,0.1 89ABCDEF:S:8
```
As you can see, each address is followed by a comma and an amount, except for
the change address, for which the amount will be calculated automatically.
All addresses belonging to your seed in the above examples are already
imported and tracked, so you’re OK. If you wanted to send to `89ABCDEF:S:11`,
you’d have to import it first.
Let’s go with the first of our two examples above.
Upon invocation, the `mmgen-txcreate` command shows you a list of your
unspent outputs along with a menu allowing you to sort the outputs by four
criteria: transaction ID, address, amount and transaction age. Your overall
balance in BTC appears at the top of the screen. In our example, the display
will look something like this:
```text
UNSPENT OUTPUTS (sort order: Age) Total BTC: 1
Num TX id Vout Address Amt(BTC) Age(d)
1) e9742b16... 5 3L3kxmi.. 89ABCDEF:S:1 Donations 0.1 1
2) fa84d709... 6 3N4dSGj.. 89ABCDEF:S:2 Storage 1 0.2 1
3) 8dde8ef5... 6 3M1fVDc.. 89ABCDEF:S:3 Storage 2 0.3 1
4) c76874c7... 0 3E8MFoC.. 89ABCDEF:S:4 Storage 3 0.4 1
Sort options: [t]xid, [a]mount, a[d]dress, [A]ge, [r]everse, [M]mgen addr
Display options: show [D]ays, [g]roup, show [m]mgen addr, r[e]draw screen
'q'=quit view, 'p'=print to file, 'v'=pager view, 'w'=wide view, 'l'=add label:
```
After quitting the menu with ‘q’, you’ll see the following prompt:
```text
Enter a range or space-separated list of outputs to spend:
```
Here you must choose unspent outputs of sufficient value to cover the send
amount of 0.1 BTC, plus the transaction fee (for more on fees, see ‘Transaction
Fees’ under ‘Advanced Topics’ below). Output #2 is worth 0.2 BTC, which is
sufficient, so we’ll choose that and hit ENTER. When prompted for a
transaction fee, we’ll choose 0.0001 BTC (note that integer fees followed by
the letter ‘s’ for “satoshis per byte” are also permissible). After a couple
more prompts and confirmations, your transaction will be saved:
```text
Transaction written to file 'FEDCBA[0.1].rawtx'
```
The transaction filename consists of a unique MMGen Transaction ID plus the
non-change spend amount.
As you can see, MMGen gives you complete control over your transaction inputs
and change addresses. This feature will be appreciated by privacy-conscious users.
#### Sign a transaction (offline computer)
Now transfer the the raw transaction file to your offline computer and sign it
using your default wallet:
```text
$ mmgen-txsign FEDCBA[0.1].rawtx
...
Signed transaction written to file 'FEDCBA[0.1].sigtx'
```
Note that the signed transaction file has a new extension, `.sigtx`.
#### Send a transaction (online computer)
Now you’re ready for the final step: broadcasting the transaction to the
network. Start bitcoind if it’s not already running, and make sure your
blockchain is fully synced. Then copy the signed transaction file to your
online computer and issue the command:
```text
$ mmgen-txsend FEDCBA[0.1].sigtx
...
Transaction sent: abcd1234....
```
Like all MMGen commands, `mmgen-txsend` is interactive, so you’ll be prompted
before the transaction is actually broadcast. If the send was successful, a
64-character hexadecimal Bitcoin Transaction ID will be displayed (`abcd1234...`
in our case).
Once the transaction is broadcast to the network and confirmed, your address
listing should look something like this:
```text
$ mmgen-tool listaddresses minconf=1
MMGenID COMMENT BALANCE
89ABCDEF:S:1 Donations 0.1
89ABCDEF:S:3 Storage 2 0.3
89ABCDEF:S:4 Storage 3 0.4
89ABCDEF:S:5 0.0999
TOTAL: 0.8999 BTC
```
Alternatively, you may use `mmgen-tool twview` or `mmgen-txcreate -i` for more
detailed and configurable output:
```text
$ mmgen-tool twview
UNSPENT OUTPUTS (sort order: Age) Total BTC: 0.8999
Network: BTC MAINNET
Num TXid Vout Address Amt(BTC) Confs
1) e3c3.. 6 36bNmyYISiptuvJG3X7MPwii.. 89ABCDEF:S:1 Donations 0.1 68
2) face.. 6 3HgYCsfqYzIg7LVVfDTp7gYJ.. 89ABCDEF:S:3 Storage 2 0.3 68
3) abab.. 6 34Tu3z1tiexXDonNsFIkvzqu.. 89ABCDEF:S:4 Storage 3 0.4 68
4) 123c.. 6 3PeI55vtp2bX2uKDkAAR2c6e.. 89ABCDEF:S:5 0.0999 7
```
Since you’ve sent 0.1 BTC to a third party, your balance has decreased by 0.1
BTC plus the transaction fee of 0.0001 BTC.
Congratulations! You’ve now mastered the basics of MMGen! To learn about some
of MMGen’s more advanced features, continue reading.
### Additional Features
#### Using the mnemonic, seed and hexseed formats
Using your default wallet from the exercises above, generate a mnemonic:
```text
$ mmgen-walletconv -o words
...
Mnemonic data written to file '89ABCDEF.mmwords'
$ cat 89ABCDEF.mmwords
pleasure tumble spider laughter many stumble secret bother after search
float absent path strong curtain savior worst suspend bright touch away
dirty measure thorn
```
Since our seed is 256 bits long, the mnemonic contains 24 words. 128-bit and
192-bit seeds generate shorter mnemonics of 12 and 18 words, respectively.
Wallets with these seed lengths can be generated using the `--seed-len` option
to `mmgen-walletgen`.
Though some consider 128 bits of entropy to provide adequate security for the
foreseeable future, it’s advisable to stick to the default 256-bit seed length.
You’ll find that even a 24-word mnemonic is not difficult to memorize.
NOTE: MMGen mnemonics are generated from the Electrum wordlist, but using
ordinary base conversion instead of Electrum’s more complicated algorithm.
The mnemonic is a complete representation of your seed and may be used anywhere
where you’d use an MMGen wallet. You can generate addresses with it just as you
do with a wallet:
```text
$ mmgen-addrgen --type=segwit 89ABCDEF.mmwords 1-10
...
Address data written to file '89ABCDEF-S[1-10].addrs'
```
You can use it to sign transactions:
```text
$ mmgen-txsign FEDCBA[0.1].rawtx 89ABCDEF.mmwords
...
Signed transaction written to file 'FEDCBA[0.1].sigtx'
```
The mnemonic can also be used to regenerate a lost wallet:
```text
$ mmgen-walletconv 89ABCDEF.mmwords
...
MMGen wallet written to file '89ABCDEF-01234567[256,3].mmdat'
```
Note that the regenerated wallet has a different Key ID but of course the same
Seed ID.
An alternative to mnemonics, seed files provide yet another way of representing
your seed. They bear the extension `.mmseed` and are generated exactly the same
way as mnemonic files:
```text
$ mmgen-walletconv -o seed
...
Seed data written to file '89ABCDEF.mmseed'
```
They can be used just like mnemonics to regenerate a wallet:
```text
$ mmgen-walletconv 89ABCDEF.mmseed
...
MMGen wallet written to file '89ABCDEF-23456701[256,3].mmdat'
```
Here’s a sample seed file for a 256-bit seed:
```text
$ cat 8B7392ED.mmseed
f4c84b C5ZT wWpT Jsoi wRVw 2dm9 Aftd WLb8 FggQ eC8h Szjd da9L
```
And for a 128-bit seed:
```text
$ cat 8E0DFB78.mmseed
0fe02f XnyC NfPH piuW dQ2d nM47 VU
```
As you can see, seed files are short enough to be easily written out by hand or
memorized. And their built-in checksum makes it easy to test your memory using
a simple Unix shell command:
```text
$ echo -n XnyC NfPH piuW dQ2d nM47 VU | tr -d ' '| sha256sum | cut -c 1-6
0fe02f
```
Or you can do the same thing with `mmgen-tool`:
```text
$ mmgen-tool str2id6 'XnyC NfPH piuW dQ2d nM47 VU'
0fe02f
```
Beginning with version 0.9.0, MMGen also supports seed files in hexadecimal
(hexseed) format. Hexseed files are identical to seed files but encoded in
hexadecimal rather than base 58. They bear the extension `.mmhex`:
```text
$ cat FE3C6545.mmhex
afc3fe 456d 7f5f 1c4b fe3b c916 b875 60ae 6a3e
```
You can easily check that a hexseed is correct by generating its Seed ID with
standard command-line tools:
```text
$ echo 456d 7f5f 1c4b fe3b c916 b875 60ae 6a3e | tr -d ' ' | xxd -r -p | sha256sum -b | xxd -r -p | sha256sum -b | cut -c 1-8
fe3c6545
```
Mnemonics and hexseeds can be used to generate keys even without the MMGen
software, using basic command-line utilities, as explained in [this
tutorial][03].
#### Mnemonics, seeds and hexseeds: additional information
All MMGen commands that take mnemonic, seed or hexseed data may receive the data
interactively from the user instead of from a file. This feature allows you to
store your seed entirely in your head if you wish and never record it on a
physical medium. To input your seed data at the prompt, just specify an input
format instead of a file name:
```text
$ mmgen-addrgen -i words 1-10
...
Choose a mnemonic length: 1) 12 words, 2) 18 words, 3) 24 words: 1
Mnemonic length of 12 words chosen. OK? (Y/n): y
Enter your 12-word mnemonic, hitting RETURN or SPACE after each word:
Enter word #1:
```
Here MMGen prompts you interactively for each word of the seed phrase, checking
it for validity and reprompting if necessary. The words are not displayed on
the screen.
As a safeguard against over-the-shoulder, Tempest and other side-channel
attacks, MMGen never outputs secret data to the screen, unless you ask it to
with the `--stdout` or `-S` option. When using this option, you’ll still be
prompted before the secret data is actually displayed. This safety prompt is
overridden by the `--quiet` option, however, so you must always think twice
before using `--stdout`.
The output of any MMGen command may be written to a directory of your choice
using the `--outdir` or `-d` option. For example, on a Linux system you can use
`--outdir=/dev/shm` to write keys and seeds to volatile memory instead of disk,
ensuring that no trace of your secret data remains once your computer’s been
powered down.
#### Die roll wallet generation
Interactive dieroll wallet generation works just like the interactive mnemonic
input described in the preceding section. To generate a new dieroll wallet,
type:
```text
$ mmgen-walletconv -i dieroll
```
To save the wallet in a format of your choice, use the `-o` option:
```text
$ mmgen-walletconv -i dieroll -o bip39
```
50, 75 and 100 rolls of the die are required to create 128, 192 and 256-bit
seeds, respectively.
#### BIP39 support
BIP39 mnemonic support and usage is identical to that for native MMGen mnemonics
described above. Just use the `bip39` format specifier and extension instead of
`words`.
Convert an MMGen native mnemonic wallet to BIP39:
```text
$ mmgen-walletconv -o bip39 mywallet.words
```
Restore an MMGen wallet from a BIP39 seed phrase in a file:
```text
$ mmgen-walletconv seed.bip39
```
#### Monero mnemonic support
MMGen has limited support for Monero new-style mnemonics. While they can’t be
used as wallets, they’re supported as a password format by the `mmgen-passgen`
command and can be converted to and from hex data by the `mmgen-tool` mnemonic
commands. The format specifier and extension is `xmrseed`. Only 25-word
mnemonics (256-bit keys) are supported. Key data is reduced in accordance with
the Monero protocol before conversion, so the resulting mnemonics are guaranteed
to be canonical.
Generate a random Monero seed phrase:
```text
$ mmgen-tool mn_rand256 fmt=xmrseed
```
Generate a list of passwords in Monero mnemonic format with ID 'foo' from your
default wallet:
```text
$ mmgen-passgen -f xmrseed 'foo' 1-10
```
#### Incognito wallets
An incognito format wallet is indistinguishable from random data, allowing you
to hide your wallet at an offset within a random-data-filled file or partition.
Barring any inside knowledge, a potential attacker has no way of knowing where
the wallet is hidden, or whether the file or partition contains anything of
interest at all, for that matter.
An incognito wallet with a reasonably secure password could even be hidden on
unencrypted cloud storage. Hiding your wallet at some offset in a 1GB file
increases the difficulty of any attack by a factor of one billion, assuming
again that any potential attacker even knows or suspects you have an MMGen
wallet hidden there.
If you plan to store your incognito wallet in an insecure location such as cloud
storage, you’re advised to use a strong scrypt (hash) preset and a strong
password. These can be changed using the `mmgen-passchg` utility:
```text
$ mmgen-passchg -p 5 89ABCDEF-01234567[256,3].mmdat
...
Hash preset of wallet: '3'
Enter old passphrase for MMGen wallet:
...
Hash preset changed to '5'
Enter new passphrase for MMGen wallet:
...
MMGen wallet written to file '89ABCDEF-87654321[256,5].mmdat'
```
The scrypt preset is the numeral in the wallet filename following the seed
length. As you can see, it’s now changed to `5`. Now export your new toughened
wallet to incognito format, using the `-k` option to leave the passphrase
unchanged:
```text
$ mmgen-walletconv -k -o incog 89ABCDEF-87654321[256,5].mmdat
...
Reusing passphrase at user request
...
New Incog Wallet ID: ECA86420
...
Incognito data written to file '89ABCDEF-87654321-ECA86420[256,5].mmincog'
```
Incog wallets have a special identifier, the Incog ID, which can be used to
locate the wallet data if you’ve forgotten where you hid it (see the example
below). Naturally, an attacker could use this ID to find the data too, so it
should be kept secret.
Incog wallets can also be output to hexadecimal format:
```text
$ mmgen-walletconv -k -o incox 89ABCDEF-87654321[256,5].mmdat
...
Hex incognito data written to file '89ABCDEF-87654321-CA86420E[256,5].mmincox'
```
```text
$ cat 89ABCDEF-87654321-1EE402F4[256,5].mmincox
6772 edb2 10cf ad0d c7dd 484b cc7e 42e9
4fe6 e07a 1ce2 da02 6da7 94e4 c068 57a8
3706 c5ce 56e0 7590 e677 6c6e 750a d057
b43a 21f9 82c7 6bd1 fe96 bad9 2d54 c4c0
```
Note that the Incog ID is different here: it’s generated from an init vector,
which is a different random number each time, making the incog data as a whole
different as well. This allows you to store your incog data in multiple
public locations without having repeated ‘random’ wallet data give you away.
This data is ideally suited for a paper wallet that could potentially fall into
the wrong hands.
Your incognito wallet (whether hex or binary) can be used just like any other
MMGen wallet, mnemonic or seed file to generate addresses and sign transactions:
```text
$ mmgen-addrgen --type=segwit 89ABCDEF-87654321-CA86420E[256,5].mmincox 101-110
...
Generated 10 addresses
Addresses written to file '89ABCDEF-S[101-110].addrs'
$ mmgen-txsign FABCDE[0.3].rawtx 89ABCDEF-87654321-CA86420E[256,5].mmincox
...
Signed transaction written to file FABCDE[0.3].sigtx
```
##### Hidden incognito wallets
With the `-o hincog` option, incognito wallet data can be created and hidden at
a specified offset in a file or partition in a single convenient operation, with
the random file being created automatically if necessary. Here’s how you’d
create a 1GB file `random.dat` and hide a wallet in it at offset `123456789`:
```text
$ mmgen-walletconv -k -o hincog -J random.dat,123456789 89ABCDEF-87654321[256,5].mmdat
...
New Incog Wallet ID: ED1F2ACB
...
Requested file 'random.dat' does not exist. Create? (Y/n): Y
Enter file size: 1G
...
Data written to file 'random.dat' at offset 123456789
```
Your ‘random’ file can now be uploaded to a cloud storage service, for example,
or some other, preferably non-public, location on the Internet (in a real-life
situation you will choose a less obvious offset than `123456789` though, won’t
you?).
Now let’s say at some point in the future you download this file to recover
your wallet and realize you’ve forgotten the offset where the data is hidden.
If you’ve saved your Incog ID, you’re in luck:
```text
$ mmgen-tool find_incog_data random.dat ED1F2ACB
...
Incog data for ID ED1F2ACB found at offset 123456789
```
The search process can be slow, so patience is required. In addition, on
large files ‘false positives’ are a distinct possibility, in which case you’ll
need to use the `keep_searching=1` parameter to keep going until you find the
real offset.
Hidden incog wallets are nearly as convenient to use as ordinary ones.
Generating ten addresses with your hidden incog data is as easy as this:
```text
$ mmgen-addrgen -H random.dat,123456789 101-110
```
Transaction signing uses the same syntax:
```text
$ mmgen-txsign -H random.dat,123456789 ABCDEF[0.1].rawtx
...
Signed transaction written to file 'ABCDEF[0.1].sigtx'
```
### Advanced Topics
#### Hot wallets
Chances are you’ll want to use MMGen not only for cold storage but for
day-to-day transactions too. For this you’ll need to place a portion of your
funds in a “hot wallet” on your online computer. With a hot wallet you can use
the command `mmgen-txdo` to quickly create, sign and send transactions in one
operation.
*Note: prior to Version 0.11.0, MMGen implemented hot wallets using [key-address
files][05], but these have now been obsoleted by [subwallets][06]. Information
on key-address files is archived [here][05] for the benefit of legacy
installations only.*
*Additional note: instead of using a hot wallet, you might consider setting up
[transaction autosigning][07] on your offline machine. Autosigning makes it
possible to transact directly from cold storage in a secure and convenient way.
Autosigning is available for Linux-based systems only and works best with
Raspberry Pi and similar devices, for which LED support is provided.*
Setting up a hot wallet is easy. Using the [Subwallets][06] wiki page as your
guide, generate a subwallet on your offline machine for use as a hot wallet.
Since this wallet is going to be used in an online environment, make sure it’s
protected with a strong password and hash preset.
```text
$ mmgen-subwalletgen -p5 1L
...
MMGen wallet written to file 'FC9A8735-ABCDEF00[256,5].mmdat'
```
Copy the subwallet to a USB stick or other removable device.
Now on your online computer, check your MMGen data directory for the presence of
wallet files:
```text
$ ls $HOME/.mmgen/*.mmdat
```
If any are present (there shouldn’t be if you’ve been following this guide!),
move them out of harm’s way, or copy them to a backup location and securely
delete the originals with `wipe` or `sdelete` if they’re securing any funds.
Copy the subwallet file to your MMGen data directory, making it your default
wallet for the online machine:
```text
$ cp 'FC9A8735-ABCDEF00[256,5].mmdat' $HOME/.mmgen
```
Securely delete the original file.
Generate a range of addresses with your online default wallet/subwallet and
import them into your tracking wallet:
```text
$ mmgen-addrgen --type=bech32 1-10
$ mmgen-addrimport FC9A8735-B*.addrs
```
Send some coins to an address or addresses in this range using your method of
choice.
Now you can spend from these addresses using `mmgen-txdo`, creating, signing
and sending transactions in one operation:
```text
$ mmgen-txdo 1AmkUxrfy5dMrfmeYwTxLxfIswUCcpeysc,0.1 FC9A8735:S:2
(choose an input from wallet FC9A8735)
...
Transaction sent: abcd1234....
```
Bear in mind that your subwallet/online default wallet doesn’t require a backup,
as it can always be regenerated from its offline parent. If you ever wish to
delete it, however, you should do so securely if there are still funds under its
control.
#### Transaction Fees
MMGen gives you several options for dealing with transaction fees.
Firstly, and most simply, you may do nothing, in which case MMGen will calculate
the fee automatically using bitcoind’s `estimatefee` RPC call. You can adjust
the estimated fee by any factor using the `--tx-fee-adj` option, a handy feature
when you need transactions to confirm a bit more quickly. MMGen has no default
fee, so if network fee estimation fails for any reason, you’ll be prompted to
enter the fee manually.
Secondly, you may specify the fee as an absolute BTC amount (a decimal number).
This can be done either on the command line or at the interactive prompt when
creating transactions with `mmgen-txcreate`, `mmgen-txdo` or `mmgen-txbump`.
Thirdly, instead of using an absolute BTC amount, you may specify the fee in
satoshis per byte and let MMGen calculate the fee based on the transaction size.
This also works both on the command line and at the interactive prompt. The
satoshis-per-byte specification is an integer followed by the letter `s`. A fee
of 90 satoshis per byte is thus represented as `90s`.
MMGen has a hard maximum fee (currently 0.003 BTC) which is alterable only in the
config file. Thus MMGen will never create or broadcast any transaction with a
mistakenly or dangerously high fee unless you expressly permit it to.
#### BIP 125 replace-by-fee (RBF) transactions
As of version 0.9.1, MMGen supports creating replaceable and replacement
transactions in accordance with the BIP 125 replace-by-fee (RBF) specification.
To make your transactions replaceable, just specify the `--rbf` option when
creating them with `mmgen-txcreate` or `mmgen-txdo`.
Version 0.9.1 also introduces `mmgen-txbump`, a convenient command for quickly
creating replacement transactions from existing replaceable ones.
`mmgen-txbump` can create, sign and send transactions in a single operation if
desired.
Continuing the examples from our primer above, we’ll examine two RBF scenarios,
one for a hot wallet and one for a cold storage wallet. In the first scenario,
initial and replacement transactions will be created, signed and sent in one
operation. In the second, a batch of replacement transactions with
incrementally increasing fees will created online and then signed offline.
#### With an online (hot) wallet
Create, sign and send a BIP 125 replaceable transaction with a fee of 50
satoshis per byte:
```text
$ mmgen-txdo --rbf --tx-fee 50s 1AmkUxrfy5dMrfmeYwTxLxfIswUCcpeysc,0.1 0FDE89AB:S:5
...
Signed transaction written to file 'FEDCBB[0.1,50].sigtx'
...
Transaction sent: dcba4321....
```
Here you’ve sent 0.1 BTC to a third-party address and the change back to
yourself at address #5 of your default hot wallet with Seed ID `0FDE89AB`.
Note that the fee is shown in the filename after the send amount. The presence
of the fee in the filename identifies the transaction as replaceable.
If the transaction fails to confirm in your desired timeframe, then create, sign
and send a replacement transaction with a higher fee, say 100 satoshis per byte:
```text
$ mmgen-txbump --send --tx-fee 100s --output-to-reduce c 'FEDCBB[0.1,50].sigtx'
...
Signed transaction written to file 'DAE123[0.1,100].sigtx'
...
Transaction sent: eef01357....
```
The `--send` switch instructs `mmgen-txbump` to sign and send the transaction
after creating it. The `--output-to-reduce` switch with an argument of `c`
requests that the increased fee be deducted from the change (`c`) output, which
is usually what is desired. If you want it taken from some other output,
identify the output by number. Note that the resulting replacement transaction
has a different identifier, since it’s a new transaction.
If this transaction also fails to confirm, then repeat the above step as many
times as necessary to get a confirmation, increasing the fee each time. The
only thing you have to modify with each iteration is the argument to `--tx-fee`.
To reduce your typing even further, use the `--yes` switch to skip all
non-essential prompts.
#### With an offline (cold storage) wallet
To achieve the same result as in the above example using a cold wallet, just
create the initial transaction with `mmgen-txcreate` instead of `mmgen-txdo`:
```text
$ mmgen-txcreate --rbf --tx-fee 50s 1AmkUxrfy5dMrfmeYwTxLxfIswUCcpeysc,0.1 89ABCDEF:S:5
...
Transaction written to file 'FEDCBC[0.1,50].rawtx'
```
Now create a series of transactions with incrementally increasing fees for
offline signing:
```text
$ mmgen-txbump --tx-fee 100s --output-to-reduce c 'FEDCBC[0.1,50].rawtx'
$ mmgen-txbump --tx-fee 150s --output-to-reduce c 'FEDCBC[0.1,50].rawtx'
$ mmgen-txbump --tx-fee 200s --output-to-reduce c 'FEDCBC[0.1,50].rawtx'
```
To speed things up, add the `--yes` switch to make `mmgen-txbump` completely
non-interactive.
The result will be four raw transaction files with increasing fees, like this:
```text
FEDCBC[0.1,50].rawtx
3EBB00[0.1,100].rawtx
124FFF[0.1,150].rawtx
73DABB[0.1,200].rawtx
```
Copy the files to an empty folder, transfer the folder to your offline machine and batch sign them:
```text
$ mmgen-txsign -d my_folder --yes my_folder/*.rawtx
```
Then copy the signed transaction files back to your online machine and broadcast
them in turn until you get a confirmation:
```text
$ mmgen-txsend FEDCBC[0.1,50].sigtx # ...if this doesn’t confirm, then
$ mmgen-txsend 3EBB00[0.1,100].sigtx # ...if this doesn’t confirm, then
$ mmgen-txsend 124FFF[0.1,150].sigtx # ...if this doesn’t confirm, then
$ mmgen-txsend 73DABB[0.1,200].sigtx
```
#### Keeping your installation up to date
To make sure you have all the latest features and bugfixes, it’s a good idea to
keep your MMGen installation upgraded to the latest version. MMGen does no
checking for updates itself, so the following steps should be performed by you
on a periodic basis.
If you’ve deleted or lost your local copy of the MMGen repository, clone it
again from Github or Gitlab:
```text
$ git clone https://github.com/mmgen/mmgen.git # Github
$ git clone https://gitlab.com/mmgen/mmgen.git # Gitlab
```
Enter the repository and check out the master branch. Pull the latest changes
from the remote repository:
```text
$ cd mmgen
$ git checkout master
$ git pull
```
Check out the current stable version for your operating system:
```text
$ git checkout stable_linux # for Linux-based systems
$ git checkout stable_msys2 # for Microsoft Windows / MSYS2 systems
```
Note that if you want to try out the latest “bleeding edge” (and possibly
unstable) features, you can just remain on the master branch and omit the
preceding step. Information on recently added features can be found by typing
`git log` or visiting the online [commits page][cp].
Check the latest release notes in `doc/release-notes` and make note of any new
features or requirements. Now build and install:
```text
$ rm -rf dist build
$ python3 -m build --no-isolation
$ python3 -m pip install --user --upgrade dist/*.whl
```
[01]: Tracking-and-spending-ordinary-Bitcoin-addresses
[02]: https://tpfaucet.appspot.com
[03]: Recovering-Your-Keys-Without-the-MMGen-Software
[04]: MMGen-Quick-Start-with-Regtest-Mode
[05]: Key-address-files
[06]: Subwallets
[07]: command-help-autosign
[08]: Install-Bitcoind
[09]: Altcoin-and-Forkcoin-Support
[ax]: Altcoin-and-Forkcoin-Support#a_xmr
[cp]: ../commits/master
[mx]: command-help-xmrwallet