update documentation from wiki

doc/wiki/install-linux/Install-MMGen-on-Debian-or-Ubuntu-Linux.md

@@ -2,10 +2,10 @@
 
 Install required Debian/Ubuntu packages:
 
-	$ sudo apt-get install autoconf git libgmp-dev libssl-dev libpcre3-dev libtool wipe
-	$ sudo apt-get install python3-dev python3-ecdsa python3-pexpect python3-setuptools python3-cryptography python3-nacl python3-pip python3-gmpy2 python3-sha3
+	$ sudo apt-get install autoconf git libgmp-dev libssl-dev libpcre3-dev libtool wipe curl
+	$ sudo apt-get install python3-dev python3-ecdsa python3-pexpect python3-setuptools python3-cryptography python3-nacl python3-pip python3-gmpy2 python3-sha3 python3-requests python3-aiohttp
 
-Using the [pip3][P] installer, install the Python scrypt library:
+Using the [pip3][P] installer, install the scrypt Python package:
 
 	$ sudo -H pip3 install scrypt
 
@@ -25,37 +25,41 @@ Install MMGen:
 	$ git clone https://github.com/mmgen/mmgen.git
 	$ cd mmgen
 	$ git checkout stable_linux # see 'Note' below
-	$ sudo ./setup.py install
+	$ ./setup.py build
+	$ sudo ./setup.py install # see 'Testing Note' below
 	$ cd ..
 
 **Note:** if you want to use features that have appeared since the latest
 `stable_linux` release, then you can omit the `git checkout` step and remain on
-the `master` branch.  But though the tip of `master` is always tested on Linux
-before being pushed to the public repository, please be aware that security
-vulnerabilities are more likely to be present in new code than in a stable
-release.  In addition, new code may require dependencies or installation steps
-not yet covered in the documentation.
+the `master` branch.  Please bear in mind, however, that while the tip of
+`master` is always tested on Linux before being pushed to the public repository,
+security vulnerabilities are more likely to be present in new code than in a
+stable release.  In addition, new code may require dependencies or installation
+steps not yet covered in the documentation.
+
+**Testing Note:** MMGen may be tested in place prior to installation.  Refer to
+the [Test Suite][ts] wiki page for details.
 
 Install your coin daemon(s).  To install prebuilt binaries, go [here][01].  To
 install from source, go [here][02].
 
 #### *Note for offline machines:*
 
-> Naturally, your offline machine must be connected to the Internet to retrieve
-> and install the above packages as described above.  This is normally not a
-> problem, as you can simply take the machine offline permanently after the
-> install is done, preferably removing or disabling its network interfaces.
+> Your offline machine must be connected to the Internet to retrieve and install
+> the above packages as described above.  This is normally not a problem, as you
+> can simply take the machine offline permanently after the install is done,
+> preferably removing or disabling its network interfaces.
 
 > However, if your machine is already offline and you wish to leave it that way,
 > or if it lacks a network interface entirely, then you’ll need to take roughly
 > the following steps:
 
->> If your offline and offline machines have the same architecture, then just
+>> If your offline and offline machines have the same architecture, then you can
 >> download the Debian/Ubuntu packages and their dependencies on your online
->> machine using `apt-get download`.  Otherwise, you must download the packages
+>> machine using `apt-get download`.  Otherwise, you must retrieve the packages
 >> manually from `packages.debian.org` or `packages.ubuntu.com`.
 >>
->> Download the Python packages using `pip3 download`.
+>> Download any required Python packages using `pip3 download`.
 >>
 >> Transfer the downloaded files and cloned Git repositories to your offline
 >> computer using a USB stick or other removable medium.  Install the
@@ -63,11 +67,12 @@ install from source, go [here][02].
 >> install`.  Install MMGen and the secp256k1 library from the copied Git
 >> repositories as described above.
 
-Congratulations, your installation is now complete!  Now proceed to [**Getting
-Started with MMGen**][gs].
+Congratulations, your installation is now complete!  You can now proceed to
+[**Getting Started with MMGen**][gs].
 
 [01]: Install-Bitcoind
 [02]: Install-Bitcoind-from-Source-on-Debian-or-Ubuntu-Linux
+[ts]: Test-Suite
 [gs]: Getting-Started-with-MMGen
 [03]: https://pypi.python.org/packages/source/p/pexpect/pexpect-3.1.tar.gz
 [P]: https://pypi.org/project/pip

doc/wiki/install-mswin/Install-MMGen-on-Microsoft-Windows.md

@@ -295,12 +295,12 @@ Enter the directory and install:
 
 **Note:** if you want to use features that have appeared since the latest
 `stable_msys2` release, then you can omit the `git checkout` step and remain on
-the `master` branch.  But please be aware that security vulnerabilities are more
-likely to be present in new code than in a stable release.  In addition, while
-the tip of `master` is always tested on Linux before being pushed to the public
-repository, it’s not guaranteed to install or run on MSYS2.  Installation or
-runtime issues may also arise due to missing dependencies or installation steps
-not yet covered in the documentation.
+the `master` branch.  Please bear in mind, however, that security
+vulnerabilities are more likely to be present in new code than in a stable
+release.  In addition, while the tip of `master` is always tested on Linux
+before being pushed to the public repository, it’s not guaranteed to install or
+run on MSYS2.  Installation or runtime issues may also arise due to missing
+dependencies or installation steps not yet covered in the documentation.
 
 ### 11. Install and launch your coin daemons
 
@@ -316,16 +316,16 @@ about adding to the Windows path, since your `PATH` variable was taken care of
 in Step 5.  Note that the daemons must be installed on both your online and
 offline machines.
 
-To transact ETH, ETC or ERC20 tokens you’ll need the latest Windows `parity.exe`
-binary from the [Parity Github repository][pg].  Parity, unlike the other coin
-daemons, needs to be installed on the online machine only.  Copy the binary to
-your executable path, preferably `/usr/local/bin`.
+To transact ETH, ETC or ERC20 tokens you’ll need the latest Windows
+`openethereum.exe` binary from the [OpenEthereum Github repository][og].
+OpenEthereum, unlike the other coin daemons, is installed on the online machine
+only.  Copy the binary to your executable path, preferably `/usr/local/bin`.
 
-Typically you’ll wish to launch Parity as follows:
+Typically you’ll wish to launch OpenEthereum as follows:
 
-	$ parity.exe --jsonrpc-apis=all
+	$ openethereum.exe --jsonrpc-apis=all
 
-More information on Parity’s command-line options can be found [here][pl].
+More information on OpenEthereum’s command-line options can be found [here][pl].
 
 ### 12. You’re done!
 
@@ -335,17 +335,20 @@ MMGen on Linux, except for [autosigning][ax], are now supported on MSYS2 too.
 Please be aware of the following, however:
 
 + Non-ASCII filenames cannot be used with the Monero wallet syncing tool.  This
-  appears to be an issue with the Monero wallet RPC daemon rather than MMGen.
+  is an issue with the Monero wallet RPC daemon rather than MMGen.
+
++ The Bitcoin-ABC daemon cannot handle non-ASCII pathnames.  This is an issue
+  with the Bitcoin-ABC implementation for Windows, not MMGen.
 
 [mh]: https://www.msys2.org
 [mp]: https://sourceforge.net/projects/msys2
 [mw]: https://github.com/msys2/msys2/wiki
 [ov]: https://github.com/mmgen/mmgen/releases/tag/v0.9.8
 [sd]: https://download.sysinternals.com/files/SDelete.zip
-[pg]: https://github.com/paritytech/parity-ethereum/releases
+[og]: https://github.com/openethereum/openethereum/releases
 [di]: Deprecated-MSWin-Installation
 [ib]: Install-Bitcoind
 [gs]: Getting-Started-with-MMGen
-[pl]: Altcoin-and-Forkcoin-Support#a_par
+[pl]: Altcoin-and-Forkcoin-Support#a_oe
 [ax]: autosign-[MMGen-command-help]
 [mc]: Altcoin-and-Forkcoin-Support#a_xmr

doc/wiki/using-mmgen/Altcoin-and-Forkcoin-Support.md

@@ -1,7 +1,7 @@
 ## Table of Contents
 
 #### [Full support for Ethereum (ETH), Ethereum Classic (ETC) and ERC20 Tokens](#a_eth)
-* [Install and run Parity Ethereum](#a_par)
+* [Install and run OpenEthereum](#a_oe)
 * [Install Ethereum dependencies](#a_ed)
 * [Transacting and other basic operations](#a_tx)
 * [Creating and deploying ERC20 tokens](#a_dt)
@@ -20,31 +20,30 @@ Ethereum, Ethereum Classic and ERC20 tokens are fully supported by MMGen, on the
 same level as Bitcoin.  In addition, ERC20 token creation and deployment are
 supported via the `create-token.py` script.
 
-#### <a name='a_par'>Install and run Parity Ethereum</a>
+#### <a name='a_oe'>Install and run OpenEthereum</a>
 
-MMGen uses Parity to communicate with the Ethereum blockchain.  For information
-on installing Parity on your system, visit the Parity Ethereum [homepage][h] or
-[Git repository][g].  [MMGenLive][l] users can install Parity automatically from
-signed binaries using the [`mmlive-daemon-upgrade`][U] script.  Parity is not
-used for transaction signing, so you needn’t install it on your offline machine.
+MMGen uses OpenEthereum to communicate with the Ethereum blockchain.  For
+information on installing OpenEthereum on your system, visit the OpenEthereum
+[wiki][ow] or [Git repository][og].  OpenEthereum is not used for transaction
+signing, so you needn’t install it on your offline machine.
 
-Parity must be invoked with the `--jsonrpc-apis=all` option so that MMGen can
-communicate with it.  If you’re running the daemon and MMGen on different
+OpenEthereum must be invoked with the `--jsonrpc-apis=all` option so that MMGen
+can communicate with it.  If you’re running the daemon and MMGen on different
 machines you’ll also need the following:
 
-	--jsonrpc-hosts=all --jsonrpc-interface=<IP of Parity’s host>
+	--jsonrpc-hosts=all --jsonrpc-interface=<IP of OpenEthereum’s host>
 
 To transact Ethereum Classic, use `--chain=classic --jsonrpc-port=8555`
 
 To run the daemon offline, use `--mode=offline`, otherwise `--mode=active`.
 
-MMGen can also be used with Parity’s light client mode, which queries other
-nodes on the Ethereum network for blockchain data.  Add the `--light` option to
-the Parity command line and read the applicable note in the [Transacting](#a_tx)
-section below.
+MMGen can also be used with OpenEthereum’s light client mode, which queries
+other nodes on the Ethereum network for blockchain data.  Add the `--light`
+option to the OpenEthereum command line and read the applicable note in the
+[Transacting](#a_tx) section below.
 
-You may require other options as well.  Consult `parity --help` for the full
-list.
+You may require other options as well.  Consult `openethereum --help` for the
+full list.
 
 #### <a name='a_ed'>Install Ethereum dependencies</a>
 
@@ -68,13 +67,13 @@ Basic operations with ETH, ETC and ERC20 tokens work as described in the
 [Getting Started][bo] guide, with some differences.  Please note the following:
 
 * Don’t forget to invoke all commands with `--coin=eth` or `--coin=etc`.
-* Use the `--token` switch with all token operations.  When importing addresses
-  into your token tracking wallet you must use the token’s address as the
-  argument.  After this, the token symbol, e.g. `--token=eos`, is sufficient.
+* Use the `--token` option with the token symbol as parameter for all token
+  operations.  When importing addresses for a new token into your tracking
+  wallet, use the `--token-addr` option with the token address instead.
 * Addresses and other hexadecimal values are given without the leading `0x`.
 * Fees are expressed in Gas price, e.g. `12G` for 12 Gwei or `1000M` for 1000
   Mwei.  This works at both the command line and interactive prompt.
-* When using Parity in light client mode, the `--cached-balances` option
+* When using OpenEthereum in light client mode, the `--cached-balances` option
   will greatly speed up operations of the `mmgen-txcreate`, `mmgen-txdo` and
   `mmgen-tool twview` commands by reducing network queries to a minimum.  If
   your account balances have changed, they may be refreshed interactively within
@@ -92,7 +91,7 @@ Generate some ETH addresses with your default wallet:
 
 Create an EOS token tracking wallet and import the addresses into it:
 
-	$ mmgen-addrimport --coin=eth --token=86fa049857e0209aa7d9e616f7eb3b3b78ecfdb0 ABCDABCD-ETH[1-5].addrs
+	$ mmgen-addrimport --coin=eth --token-addr=86fa049857e0209aa7d9e616f7eb3b3b78ecfdb0 ABCDABCD-ETH[1-5].addrs
 
 *Unlike the case with BTC and derivatives, ETH and ETC tracking wallets are
 created and managed by MMGen itself and located under the MMGen data directory.
@@ -121,7 +120,7 @@ View your EOS tracking wallet:
 
 	$ mmgen-tool --coin=eth --token=eos twview
 
-To transact ETH instead of EOS, omit the `--token` arguments.
+To transact ETH instead of EOS, omit the `--token` and `--token-addr` arguments.
 
 #### <a name='a_dt'>Creating and deploying ERC20 tokens</a>
 
@@ -189,7 +188,7 @@ price!*
 
 Create an MFT token tracking wallet and import your ETH addresses into it:
 
-	$ mmgen-addrimport --coin=eth --token=abcd1234abcd1234abcd1234abcd1234abcd1234 ABCDABCD-ETH[1-5].addrs
+	$ mmgen-addrimport --coin=eth --token-addr=abcd1234abcd1234abcd1234abcd1234abcd1234 ABCDABCD-ETH[1-5].addrs
 
 View your MFT tracking wallet:
 
@@ -318,9 +317,8 @@ received only minimal testing, or no testing at all.  At startup you’ll be
 informed of the level of your selected coin’s support reliability as deemed by
 the MMGen Project.
 
-[h]: https://www.parity.io/ethereum
-[g]: https://github.com/paritytech/parity-ethereum/releases
-[l]: https://github.com/mmgen/MMGenLive
+[ow]: https://openethereum.github.io/wiki
+[og]: https://github.com/openethereum/openethereum/releases
 [y]: https://github.com/ethereum/pyethereum
 [P]: https://pypi.org/project/pip
 [M]: https://getmonero.org/downloads/#linux

doc/wiki/using-mmgen/MMGen-Quick-Start-with-Regtest-Mode.md

@@ -109,7 +109,7 @@ step 7 will look something like this:
 
 13. View the transaction in the mempool:
 
-		$ mmgen-regtest show_mempool
+		$ mmgen-regtest mempool
 		['78ca853816b55527b42ca8784c887a5f482c752522f914d2f17d6afcd8a3b076']
 
 14. Mine a block:
@@ -118,7 +118,7 @@ step 7 will look something like this:
 
 15. Check the mempool again:
 
-		$ mmgen-regtest show_mempool
+		$ mmgen-regtest mempool
 		[]
 
 16. List Alice’s addresses.  Note that Alice has lost a bit to transaction fees: