update documentation from wiki

README.md

@@ -202,8 +202,8 @@ Donate:
 [8]:  https://github.com/mmgen/MMGenLive
 [9]:  https://mmgen.org/images/rxvt-txcreate.jpg
 [Q]:  ../../wiki/MMGen-Wallet-Quick-Start-with-Regtest-Mode
-[K]:  ../../wiki/Recovering-Your-Keys-Without-the-MMGen-Software
-[S]:  ../../wiki/Recovering-Your-Keys-Without-the-MMGen-Software#a_mh
+[K]:  ../../wiki/Recovering-Your-Keys-Without-the-MMGen-Wallet-Software
+[S]:  ../../wiki/Recovering-Your-Keys-Without-the-MMGen-Wallet-Software#a_mh
 [F]:  ../../wiki/Altcoin-and-Forkcoin-Support
 [W]:  https://github.com/bitcoin/bips/blob/master/bip-0032.mediawiki
 [ew]: https://github.com/spesmilo/electrum/blob/1.9.5/lib/mnemonic.py

doc/wiki/install-linux/Install-MMGen-Wallet-on-Linux.md

@@ -54,8 +54,8 @@ If not running in a virtual environment, make sure that `~/.local/bin` is in
 `/usr` or `/usr/local`.
 
 ```text
-$ git clone https://github.com/mmgen/mmgen.git
-$ cd mmgen
+$ git clone https://github.com/mmgen/mmgen-wallet.git
+$ cd mmgen-wallet
 $ python3 -m build --no-isolation
 $ python3 -m pip install --upgrade dist/*.whl # see 'Install Note' below
 $ cd ..
@@ -93,7 +93,7 @@ following steps:
 > -i` and the Python packages with `python3 -m pip install`.
 
 Congratulations, your installation is now complete!  You can now proceed to
-[**Getting Started with MMGen**][gs].
+[**Getting Started with MMGen Wallet**][gs].
 
 [01]: Install-Bitcoind
 [02]: Install-Bitcoind-from-Source-on-Linux

doc/wiki/using-mmgen-wallet/Getting-Started-with-MMGen-Wallet.md

@@ -1114,16 +1114,16 @@ If you’ve deleted or lost your local copy of the MMGen Wallet repository, clon
 it again from Github, Gitlab or mmgen.org:
 
 ```text
-$ git clone https://github.com/mmgen/mmgen.git
-$ git clone https://gitlab.com/mmgen/mmgen.git
-$ git clone https://mmgen.org/project/mmgen/mmgen.git
+$ git clone https://github.com/mmgen/mmgen-wallet.git
+$ git clone https://gitlab.com/mmgen/mmgen-wallet.git
+$ git clone https://mmgen.org/project/mmgen/mmgen-wallet.git
 ```
 
 Enter the repository and check out the master branch.  Pull the latest changes
 from the remote repository:
 
 ```text
-$ cd mmgen
+$ cd mmgen-wallet
 $ git checkout master
 $ git pull
 ```
@@ -1142,7 +1142,7 @@ $ python3 -m pip install user --upgrade dist/*.whl
 
 [01]: Tracking-and-spending-ordinary-Bitcoin-addresses
 [02]: https://tpfaucet.appspot.com
-[03]: Recovering-Your-Keys-Without-the-MMGen-Software
+[03]: Recovering-Your-Keys-Without-the-MMGen-Wallet-Software
 [04]: MMGen-Wallet-Quick-Start-with-Regtest-Mode
 [05]: Key-address-files
 [06]: Subwallets

doc/wiki/using-mmgen-wallet/MMGen-Wallet-Quick-Start-with-Regtest-Mode.md

@@ -1,9 +1,9 @@
-MMGen’s regtest mode, also known as Bob and Alice mode, uses the Bitcoin
+MMGen Wallet’s regtest mode, also known as Bob and Alice mode, uses the Bitcoin
 daemon’s regression test feature to create a virtual network of two users who
 transact on a private blockchain.
 
-All of MMGen’s functionality is available in regtest mode, making it an ideal
-way to learn to use MMGen Wallet without risking real coins.
+All of MMGen Wallet’s functionality is available in regtest mode, making it an
+ideal way to learn to use MMGen Wallet without risking real coins.
 
 To send a transaction or perform any other operation as Bob or Alice, just add
 the `--bob` or `--alice` option to the applicable MMGen Wallet command.

doc/wiki/using-mmgen-wallet/Recovering-Your-Keys-Without-the-MMGen-Software.md → doc/wiki/using-mmgen-wallet/Recovering-Your-Keys-Without-the-MMGen-Wallet-Software.md

@@ -18,11 +18,12 @@ mind: “What if I have funds in MMGen Wallet and I lose the software?  How do
 I recover my coins?”
 
 Let’s take this scenario to its logical extreme and assume you’ve lost all
-backup copies of the software, MMGen’s project page has disappeared from both
-[Github][04] and [Gitlab][05] (or been hacked) and no other repositories or
-copies are available on the Internet.  The following tutorial will show you how
-to recover the private keys for your coin addresses in the event this unlikely
-combination of circumstances ever occurs.
+backup copies of the software, the MMGen Wallet project page has disappeared
+from all of [Github][04], [Gitlab][05], [Gitflic][06] and [mmgen.org][07] (or
+been hacked), and no other verifiable repositories or copies are available on
+the Internet.  The following tutorial will show you how to recover the private
+keys for your coin addresses in the event this very unlikely combination of
+circumstances ever occurs.
 
 In addition to private keys, this tutorial can also be used to recover passwords
 generated with the `mmgen-passgen` command.
@@ -503,5 +504,7 @@ False
 [01]: https://github.com/casascius/Bitcoin-Address-Utility
 [02]: https://github.com/matja/bitcoin-tool
 [03]: https://github.com/spesmilo/electrum/blob/1.9.5/lib/mnemonic.py
-[04]: https://github.com/mmgen/mmgen
-[05]: https://gitlab.com/mmgen/mmgen
+[04]: https://github.com/mmgen/mmgen-wallet
+[05]: https://gitlab.com/mmgen/mmgen-wallet
+[06]: https://gitflic.ru/project/mmgen/mmgen-wallet
+[07]: https://mmgen.org/project/mmgen/mmgen-wallet

doc/wiki/using-mmgen-wallet/Test-Suite.md

@@ -1,9 +1,10 @@
 ## Introduction
 
 In addition to low-level subsystems, the suite tests the overall operation of
-MMGen’s commands by running them interactively as a user would.  Thus the test
-suite is useful not only for ensuring the MMGen Wallet system is correctly
-installed and working on your platform but also for demonstrating how it works.
+the MMGen Wallet’s commands by running them interactively as a user would.  Thus
+the test suite is useful not only for ensuring the MMGen Wallet system is
+correctly installed and working on your platform but also for demonstrating how
+it works.
 
 BTC-only testing requires installation of Bitcoin Core and pycoin only, while
 altcoin testing requires additional helper programs and libraries, installation
@@ -56,17 +57,17 @@ Install Pycoin:
 
 ```text
 # online install:
-$ python3 -m pip install --user pycoin
+$ python3 -m pip install pycoin
 
 # offline install:
 $ python3 -m pip download pycoin # online
-$ python3 -m pip install --user --no-build-isolation pycoin-*.tar.gz # offline
+$ python3 -m pip install --no-build-isolation pycoin-*.tar.gz # offline
 ```
 
 Install Pylint:
 
 ```text
-$ python3 -m pip install --user pylint
+$ python3 -m pip install pylint
 ```
 
 CD to the MMGen Wallet repository root and build without installing:
@@ -135,8 +136,8 @@ may also be started and stopped manually at the DOS or MSYS2 prompt as follows
 #### Monero-Python
 
 ```text
-$ python3 -m pip install --user pycryptodomex ipaddress varint
-$ python3 -m pip install --user --no-deps monero
+$ python3 -m pip install pycryptodomex ipaddress varint
+$ python3 -m pip install --no-deps monero
 ```
 
 #### Vanitygen PlusPlus (forked from Vanitygen Plus)
@@ -195,8 +196,8 @@ $ test/test-release.sh -F
 
 `test/test-release.sh` is just a simple shell script that invokes the test
 scripts with various options and arguments to ensure complete coverage of
-MMGen’s functionality.  Launch the script with the `-t` option to view the
-invocations without running them.
+MMGen Wallet’s functionality.  Launch the script with the `-t` option to view
+the invocations without running them.
 
 The test scripts themselves are all located in the `test/` directory and bear
 the `.py` extension.  They may be run individually if desired.  Options and

doc/wiki/using-mmgen-wallet/XOR-Seed-Splitting-Theory-and-Practice.md

@@ -4,7 +4,7 @@
    - [Deterministic Shares](#a_ds)
    - [Named Splits](#a_ns)
    - [Master Shares](#a_ms)
-+ [Seed Splitting with MMGen](#a_ss)
++ [Seed Splitting with MMGen Wallet](#a_ss)
 
 ### <a id="a_xor">XOR Seed Splitting: A Theoretical Introduction</a>
 
@@ -235,7 +235,7 @@ Also note that an additional field, `master<n>`, has been appended to the share
 identifiers.  This is to ensure that the shares of each master share split are
 unique, and differ from their non-master-share counterparts.
 
-### <a id="a_ss">Seed Splitting with MMGen</a>
+### <a id="a_ss">Seed Splitting with MMGen Wallet</a>
 
 MMGen Wallet implements the seed splitting and joining functionality described
 above via the commands [`mmgen-seedsplit`][SS] and [`mmgen-seedjoin`][SJ].

mmgen/data/version

@@ -1 +1 @@
-14.0.dev23
+14.0.dev24