mmgen/mmgen-wallet
1
0
Fork 0
Code Issues Pull requests Projects Releases 28 Packages Wiki Activity

test suite: minor fix

Browse source
This commit is contained in:
The MMGen Project 2021-10-14 13:21:09 +00:00
commit a5890569a9
Signed by: mmgen
GPG key ID: 3F8B1861E32B7DA2
2 changed files with 2 additions and 88 deletions
Download patch file Download diff file Expand all files Collapse all files

88
doc/wiki/install-linux/Install-MMGen-on-Debian-or-Ubuntu-Linux.md
View file

@ -1,88 +0,0 @@
*NOTE: the instructions on this page are for a Bitcoin-only setup. For
altcoin support, additional installation steps are required. See
[**Altcoin and Forkcoin Support**][af] for more information.*
### Perform the following steps on both your online and offline computers:
For computers with no Internet connection, see **Note for offline machines** below.
#### Install required packages:
##### Debian/Ubuntu:
$ sudo apt-get install git gcc libtool make autoconf libgmp-dev libssl-dev libpcre3-dev libmpfr-dev libmpc-dev python3-dev python3-pip
##### Arch Linux:
$ sudo pacman -S git gcc libtool make autoconf automake autogen pcre python-pip
#### Upgrade the build tools:
$ pip3 install --user --upgrade pip setuptools build wheel
#### Install MMGen:
$ git clone https://github.com/mmgen/mmgen.git
$ cd mmgen
$ git checkout stable_linux # see 'Note' below
$ python3 -m build --no-isolation
$ pip3 install --user --upgrade dist/*.whl # see 'Testing Note' below
$ cd ..
**Note:** if you want to use features that have appeared since the latest
`stable_linux` release, then you can omit the `git checkout` step and remain on
the `master` branch. Please bear in mind, however, that while the tip of
`master` is always tested on Linux before being pushed to the public repository,
security vulnerabilities are more likely to be present in new code than in a
stable release. In addition, new code may require dependencies or installation
steps not yet covered in the documentation.
Install your coin daemon(s). To install prebuilt binaries, go [here][01]. To
install from source, go [here][02].
**Testing Note:** MMGen may be tested in place prior to installation. Refer to
the [Test Suite][ts] wiki page for details.
##### Note for offline machines:
The computer you’ve designated for offline use must be connected to the
Internet to retrieve and install the above packages as described above. This
is normally not a problem, as you can simply take it offline permanently after
the install is done, preferably removing or disabling its network interfaces.
However, if your machine is already offline and you wish to leave it that way,
or if it lacks a network interface entirely, then you’ll need to take roughly
the following steps:
> If your offline and offline computers have the same architecture, then
> download the Debian/Ubuntu packages and their dependencies on the online
> one using `apt-get download`. Otherwise, retrieve the packages manually
> from `packages.debian.org` or `packages.ubuntu.com`.
>
> Download any required Python packages using `pip3 download`, or manually
> from [pypi.org][pi] if your online and offline computers have different
> architecture.
>
> Transfer the downloaded files and cloned Git repositories to your offline
> computer using a USB stick or other removable medium. Install the
> Debian/Ubuntu packages with `sudo dpkg -i` and the Python packages with `pip3
> install --user`.
>
> Clone the [secp256k1][ec] repository and copy it to `~/.cache` directory on
> the offline machine (or copy it from your online machine’s `~/.cache`).
> Copy the MMGen repository to the offline machine and install MMGen as
> described above. If your online and offline machines have different
> architecture, then make sure to clean up any build/dist files in the
> repositories before installing (in `secp256k1` this is accomplished by `make
> clean`).
Congratulations, your installation is now complete! You can now proceed to
[**Getting Started with MMGen**][gs].
[01]: Install-Bitcoind
[02]: Install-Bitcoind-from-Source-on-Debian-or-Ubuntu-Linux
[ts]: Test-Suite
[gs]: Getting-Started-with-MMGen
[pi]: https://pypi.org
[af]: Altcoin-and-Forkcoin-Support
[ec]: https://github.com/bitcoin-core/secp256k1.git

2
test/misc/term.py
View file

@ -137,6 +137,7 @@ def tt_txview():
tx = MMGenTX.Unsigned(filename=fn,quiet_open=True)
while True:
tx.view_with_prompt('View data for transaction?',pause=False)
set_vt100()
if not keypress_confirm('Continue testing transaction view?',default_yes=True):
break
@ -151,6 +152,7 @@ tt_start()
tt_get_terminal_size()
tt_color()
tt_license()
set_vt100()
tt_line_input()
tt_urand()
tt_txview()